|
ALQ07 Datasheet, PDF (19/28 Pages) Astec America, Inc – Technical Reference Notes | |||
|
◁ |
19
Minimum Load Requirements
Parameter
Device
Symbol
Typ
Io1MIN
0
Minimum Load
All
Io2MIN
0
Unit
A
A
Output Over-current Protection
For ALQ07 series DC/DC converters, when any output occurs over-current, all
outputs shut down after 100-300ms. The module can be restarted by resetting the
input power or CNT control.
Output Over-voltage Protection
The over-voltage protection has a separate feedback loop, which is activated when
the output voltage exceeds 120% to 150% of the nominal output voltage. The
module can be restarted by resetting the input power or CNT control.
Over Temperature Protection
ALQ07 DC/DC converters will shut down when the temperature of the board
reaches 101â to 115â, and the module will automatically restart if the temperature
of the board is under 100â.
Output Filters
When the load is sensitive to ripple and noise, an output filter can be added to
minimize the effects. A simple output filter to reduce output ripple and noise can be
made by connecting a capacitor Cout across the output as shown in Figure âOutput
Ripple Filterâ. The recommended value for the output tantalum capacitor Cout is
220uF.
ALQ07 DC-DC Converter Technical Reference Notes
DATE: Aug., 9, 2003
|
▷ |