English
Language : 

8420-51 Datasheet, PDF (6/8 Pages) ASM GmbH – MEMORY HiLOGGER
6
Control up to 16 Instruments Over LAN Connections
- PC Application -
LOGGER COMMUNICATOR 9334 (optional software)
Collect Data on a PC via Ethernet
Data from a HiLOGGER connected to a LAN can be stored on the hard disk of a PC in real time. Other functions include waveform
display, CSV conversion, printing, numerical value calculations and searching.
Acquired data (either all data, or only that between
marker cursors) can be converted to CSV format
text data. Data in this format can be loaded into a
spreadsheet program such as Excel.
Acquired data can
be printed out as a
waveform image on a
connected printer.
A table shows time
difference and potential
difference between A and
B cursors, and the time and
potential at each cursor on
the waveform screen.
Acquired data can be
displayed as numerical values
for time series’. Waveform
image and numerical
values can be displayed
simultaneously.
Acquired data can be
subjected to parameter
calculations such as
maximum value, time
and average value.
Acquired data can be
searched for specific
event marks, as well
as for conditions such
as date, maximum and
minimum values.
The waveform image of acquired
data is displayed. It can be drawn
in real time during data acquisition.
Up to 512 analog channels, 256
logic channels and 64 pulse
channels are supported.
■ Product Specifications
■ Specification Overview
LOGGER COMMUNICATOR 9334 (PC application, sold separately)
Functions
■Interface: Ethernet ■Controllable instruments: 16 ■Data
transfer: data transferred from instrument's internal memory,
data acquired in real time ■Display: displays image of
acquired waveform data on-screen, real-time data image during
acquisition, numerical values, and simultaneous display of
image and numerical values ■Maximum channels: 512 analog,
256 logic and 64 pulse channels ■Data conversion: converts
all data or data between AB cursors to CSV-format text data ■
Printing: available ■Parameter calculation: available ■Other
functions: marking function, search function
PC operating systems Windows 95/98/Me, Windows NT 4.0 (SP3 or later), 2000, XP
General Specifications
Measurement
parameters
8420-51/8421-51
8422-51
Temperature (thermocouple, Pt), Te m p e r a t u r e (t h e r m o c o u p l e
voltage, hum idity, totalized only), voltage, totalized pulses,
pulses, rotation count
rotation count
Input System/
Channels
Recording
intervals
Data recording
capacity
Real time save
File operations
PC Interface
Analog: 8 channels isolated by
Photo-MOS relays/16 channels
scanning isolated inputs (voltage,
temperature and humidity independently
Analog: 32 channels isolated by
Photo-MOS relays (voltage and
temperature can be independently selected
selectable for each channel)
Pulse Inputs: 4 channels
Logic Inputs: 16 channels
the DIGITAL I/O UNIT 8993)
(using
for each channel)
Pulse Inputs: 4 channels
Logic Inputs: 16 channels
the DIGITAL I/O UNIT 8993)
(using
100 ms to 1 hour (5 s to 1 hour when 100 ms to 1 hour (200 ms to 1 hour
combined with humidity measurement) when using channels 17 to 32)
Note: All input channels are scanned at high speed during each recording interval.
Internal: 32 MB (about 16.77 million data points: each data point = 2 bytes/16 bits)
External: up to 1GB (Flash ATA Card)
Waveforms are saved as binary data to the PC Card in real time, and
can be saved to separate files at preset times, selectable as full files
or an endless loop with automatic deletion of oldest data. Stored data
can be recalled by the instrument in 32-MB blocks by specifying a
time point (for one channel. For n channels, 32 MB / 2n data points are recalled.)
PC Card type II slot: accepts Flash ATA (up to 1GB)
Stores binary data (custom format), text data (Excel format), BMP data
(screen images), numerical calculation results and measurement values.
A-B cursors can be used select data to be saved (manual operation only).
RS-232C (Round 9-pin mini-DIN connector)
LAN (supports 10Base-T, DHCP, DNS)
A/D Converter One internal delta-sigma type A/D converter with digital filtering
External control connectors Trigger input, trigger output (push-button type terminal block)
Memory backup
function (@23˚C)
Time and settings: 10 years or more,
Measurement data: 10 minutes or more after turning
instrument power off (Retained from at least 2 minutes after power on)
Environmental
conditions
(non-condensating)
Operating temperature and humidity: 0 (32˚F) to 40˚C (104˚F), 30 to 80% rh
(charging temperature range: 10 (32˚F) to 30˚C (86˚F))
Storage temperature and humidity: -10 (14˚F) to 50˚C (122˚F), 30 to 80% rh
Conforming standards Safety: EN61010, EMC: EN61326, EN61000
Power supply
(1) Using the AC ADAPTER 9418-15, 100 to 240 VAC, 50/60 Hz
(2) The BATTERY PACK 9447 (when used with the AC ADAPTER, the AC
ADAPTER has priority)
(3) 12 V Battery (voltage may range from +30 to −20%, although chargeable range is
12 VDC ±5%)
Power consumption 16 VA (maximum load under battery power), 20 VA (maximum load using AC Adapter)
Continuous usage time
with one Model 9447 BATTERY
PACK, when measuring voltage
Approx. 5 hours (with 5-min backlight saver setting, after about 10 hours charging)
Approx. 2.5 hours (with bright backlight, after about 2.5 hours charging)
Charging
Battery pack
Available with the battery pack and AC Adapter connected: quick
charging time is approx. 2.5 hours (@23˚C), after which trickle charging
prevents battery self-discharge. Printing interrupts quick charging.
Dimensions &
Mass (without battery)
Approx. 234 mm (9.21 in) W × 170 mm (6.69 in) H × 52 mm (2.05 in) D mm, 1.4 kg (49.4 oz) (instrument only)
Approx. 310.5 (12.22 in) W × 170 (6.69 in) H × 52 (2.05 in) D mm, 1.7 kg (60.0 oz) (with printer attached)
Approx. 302.5 (11.91 in) W × 170 (6.69 in) H × 52 (2.05 in) D mm, 1.7 kg (60.0 oz) (with Digital I/O Unit)
Accessories
AC ADAPTER 9418-15 ×1, Application disk ×1 (Wave Viewer Wv,
Communication Commands Operating Manual), Flat-blade Screwdriver
(×1, for terminal block), Detailed Operating Manual ×1, Communication
Function/Wave Viewer Operating Manual ×1, Quick Start Manual ×1