9334 Datasheet, PDF (2/4 Pages) National Semiconductor (TI) – 8-Bit Addressable Latch

2
PC-based data collection and data
management are just a click away
Verify trend graphs and measurement values in real time from a PC
Data can be downloaded in real time to a hard disk on
your PC from a HiLOGGER connected to a LAN. You
can check measurement results from the beginning
of measurement to the current measurement result on
the Waveform Display and Numerical Value Display
screens.
The acquired data can be displayed
as digital values on a timeline. Further,
waveform images and digital values
can be displayed simultaneously.
All the acquired data or the area between the
A or B cursor can be converted to CSV text
format. Data can be used in spreadsheets
such as Excel or DADiSP (an engineering
spreadsheet used for data analysis).
Allows you to display the time
and potential differences between
cursors A and B on the Waveform
screen, as well as the time
and electrical potential at each
cursor's position in tabular form.
You can print waveforms to a
printer connected to your PC.
Calculates the
parameters for the
maximum value, the
time, and the average
value of acquired data.
In addition to being
able to use recorded
event markers to
perform searches, you
can specify criteria and
search your data for
items such as the date,
maximum value, and
minimum value.
Signals can be displayed as a graph on the Alarm or
Monitor (logic) screens, while current measurement
values are displayed in a list on the Monitor screen
(analog).
Displays acquired data as waveforms.
Waveforms are generated in real time
as the data is being loaded. Up to 256
analog channels, 256 logic channels,
and 64 pulse channels are supported.
Alarm screen
Monitor screen
(logic)
Measurement Status screen displayed in the Settings screen
Monitor screen (analog)