AX88196BLF Datasheet, PDF (39/86 Pages) ASIX Electronics Corporation – Low-pin-count Non-PCI 8/16-bit 10/100M Fast Ethernet Controller with MII Interface

AX88196BLF
Remote DMA operations are programmed via the Remote Start Address (RSAR0, 1) and Remote Byte Count
(RBCR0, 1) registers.
5.1.12 Remote Start Address Register (RSAR0)
Page0 Offset 08H (Write)
Field Name Description
7:0
RSAR0 The Remote Start Address is used to point to the start of the block of data to be transferred.
5.1.13 Remote Start Address Register (RSAR1)
Page0 Offset 09H (Write)
Field Name Description
7:0
RSAR1 The Remote Start Address is used to point to the start of the block of data to be transferred.
5.1.14 Remote Byte Count Register (RBCR0)
Page0 Offset 0AH (Write)
Field Name Description
7:0
RBCR0 The Remote Byte Count is used to indicate the length of the block (in bytes).
5.1.15 Remote Byte Count Register (RBCR1)
Page0 Offset 0BH (Write)
Field Name Description
7:0
RBCR1 The Remote Byte Count is used to indicate the length of the block (in bytes).
5.1.16 Current Remote DMA Address (CRDA0)
Page0 Offset 08H (Read)
Field Name Description (Default = 00h)
7:0
CRDA0 The Current Remote DMA Registers contain the current address of the Remote DMA. The
bit assignment is shown below:
5.1.17 Current Remote DMA Address (CRDA1)
Page0 Offset 09H (Read)
Field Name Description (Default = 00h)
7:0
CRDA1 The Current Remote DMA Registers contain the current address of the Remote DMA. The
bit assignment is shown below:
39
ASIX ELECTRONICS CORPORATION