DS-01651 Datasheet, PDF (1/2 Pages) All Sensors Corporation – Surface Mount Basic Pressure Sensors

Surface Mount Basic Pressure Sensors
General Description
Features
• 5 inH2O Full Sacale to 100 psi Full ScalePressures
• 0.5 % linearity
• Small LCC Footprint
• ROHS Compliant
Applications
• Medical Instrumentation
• Environmental Controls
• HVAC
The BASIC Serices of pressure sensors use a silicon micromachined (MEMS) pressure sensor in the most basic configuration. The
package is a ceramic surface mount configuration to provide the smallest footprint possible. Best temperature compensation is
realized when the sensor has a constant current excitation. This series is intended for use with non-corrosive, non-ionic working fluids
such as air, dry gases and the like. Specifications are written for constant voltage of 3.0 volts. The output of the device is ratiometric to
the supply voltage.
Physical Dimensions
LP Package
LF Package
Part Marking
Dimensions: inch [mm]
Part Marking
Equivalent Circuit
PART MARKING
L05G - 5 inH2O
L10G - 10 inH2O
001G - 1 PSIG
005G - 5 PSIG
015G - 15 PSIG
015A - 15 PSIA
030G - 30 PSIG
060G - 60 PSIG
100G - 100 PSIG
Vs
-Out
+Out
Gnd
7.62
.300 SQ.
Solder pads are pre-tinned
3.81
.150
CL
3.68
Pin 1
.145
3
6
Port on Gage
devi ces only
0.89
0.89
2X .035
2X
2X .035
Pin 2 1 8 7^4.19
.165
Back Side (Common to LP and LF Packages)
0.89
.035
1.4
.055
PINOUT
Pin 1: Vs
Pin 2: +out
Pin 3: N.C. Reserved
Pin 4: N.C. Reserved
Pin 5: N.C. Reserved
Pin 6: N.C. Reserved
Pin 7: -out
Pin 8: Gnd
Approvals
MKT
DATE MFG
As Is
With Change
As Is
All Sensors
DATE ENG
With Change
As Is
DS-0165 Rev C
DATE QA
With Change
As Is
DATE
With Change