IC-LNG_14 Datasheet, PDF (29/30 Pages) IC-Haus GmbH – 16-BIT OPTO ENCODER

iC-LNG 16-BIT OPTO ENCODER ^preliminary
WITH SPI AND SERIAL / PARALLEL OUTPUTS
Rev B1, Page 29/30
REVISION HISTORY
Rel Rel.Date Chapter
A1 11-09-28 Inital Release
Modification
Page
Rel Rel.Date Chapter
Modification
Page
B1 14-11-05 PACKAGING INFORMATION
PACKAGE DIMENSIONS
Added oQFN38-7x5 package information
Updated picture PAD LAYOUT
Added recommended wiring information for unused input pins
1,5,7
THERMAL DATA
Added Operating Ambient Temperature Range, Permissible Storage Temperature Range, 8
Soldering Peak Temperature for oBGA LNB2C and oQFN38-7x5 package
ELECTRICAL CHARACTERISTICS Item 101: conditions: changed to Se(λ)=0.25x S(λ)max, limits: changed to max. 950nm 9,10
Item 102: Changed name in "Max. Spectral Sensitivity"
Added new Item 103: Spectral Sensitivity of 850nm
Item 702: Changed parameter name into ’Relative Angle Error’
OPERATING REQUIREMENTS: Updated Figure 2 SPI interface timing: definition of tcs
13
SPI Interface
Item I002: changed SCK hi → lo to SCK lo → hi
SPI INTERFACE
Revised Figure 5
17
SYNCHRONIZATION
Chapter anhanced
23
ORDERING INFORMATION
Revised, added oQFN38-7x5 package
29
iC-Haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.com/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in these
materials.
The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness
for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no
guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of
the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be expected
to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications include, without
limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or environments or in
automotive applications unless specifically designated for such use by iC-Haus.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.