IMP1-3L0-2E2-1Q1-4LL0 Datasheet, PDF (8/9 Pages) Artesyn Technologies – Total Power: Up to 1500 W

i MP Data Sheet
iMP Series
iMP1 (1200/1500 Watts Max)
8-Inch Case Size: iMP1: 2.5” x 8” x 11” (63.5 mm x 203.2 mm x 279.4 mm)
Weight: iMP1 Case: 5.0 lb. • 210 W Single: 0.6 lb. • 360 W Single: 1.0 lb.
• 750 W Single: 1.6 lb. • 144 W Dual: 0.6 lb.
Normal Air Flow
Reverse Air Flow
171.45
M4 MOUNTING HOLES (4X)
IDENTICAL BOTH SIDES
38.10
171.45
#8-32 MOUNTING HOLES
(4X) MARKED AS Y
xy
xy
177.8
xy
19.05
xy
M4 MOUNTING HOLES (4X)
MARKED AS X
Notes:
1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs (0.67 N-m).
2. Control connectors: (J1) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C - Grid III Series). Connector kit includes
mating connector and 10 pins, Astec part #70-841-004. (J2) 10 position housing (Landwin 2051P1000T). Mates with housing 2050S1000 (Landwin) with 2053T011P (Landwin) pins or
JST PHDR-IOVS Housing and JST SPHD-002T-PO.5 pins.
3. Chassis material: aluminum with chemical film coating (conductive).
4. All dimensions are in millimeters and inches, and are typical.
5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8 mm). Max. torque: 5 in-lbs. (0.57 N-m).
6. Output module connections: All single O/P modules are M4 x 8 mm screws. Max. torque: 10 in-lbs.
(1.13 N-m). Dual O/P module is M3 x 8 mm screws. Max. torque: 5 in-lbs. (0.57 N-m).