|
IMP1-3L0-2E2-1Q1-4LL0 Datasheet, PDF (1/9 Pages) Artesyn Technologies – Total Power: Up to 1500 W | |||
|
POWER
Data Sheet
Intelligent MP Series
Up to 1500 Watts
Total Power: Up to 1500 W
Input Voltage: 85 - 264 VaC
88 - 300 Vdc
# of Outputs: Up to 24
SPECIAL FEATURES
ÂÂ Full medical EN60601 approval
ÂÂ Intelligent I2C control
ÂÂ Voltage adjustment on all outputs
(manual or I2C)
ÂÂ Configurable input and output OK
signals and indicators
ÂÂ Configurable inhibit/enable
ÂÂ Configurable output UP/DOWN
sequencing
ÂÂ Configurable current limit
(foldback or constant current)
ÂÂ High power density (8.8 W/cu-in)
ÂÂ Intelligent fan (speed control/fault
status)
ÂÂ Downloadable GUI from website
ÂÂ Customer provided air option
ÂÂ uP controlled PFC input with active
inrush protection
ÂÂ I2C monitor of voltage, current, and
temp
ÂÂ Programmable voltage, current limit,
inhibit/enable through I2C
ÂÂ Optional extended hold-up module
(SEMI F47 compliance)
ÂÂ Increased power density to 50% over
standard MP
ÂÂ External switching frequency sync input
ÂÂ Optional conformal coating
 Industrial temp range (-40 ºC to 70 ºC)
ÂÂ No preload required
ÂÂ Industrial shock/vibration (> 50Gâs)
SAFETY
ÂÂ UL
ÂÂ CSA
ÂÂ UV
ÂÂ BABT
ÂÂ CB
ÂÂ CE
UL60950/UL2601**
CSA22.2 No. 234 Level 5
EN60950/EN60601-1**
Compliance to
EN60950/
EN60601 BS7002
Certificate and report
Mark to LVD
Electrical Specifications
Input
Input raÂnge
85 - 264 Vac 88 - 300 Vdc
(limited to 300 Vdc in medical applications)
Frequency
47 - 440 Hz
Inrush current
40 A peak maximum (soft start)
Efficiency
Up to 85% @ full case load
Power Factor
0.99 typ. meets EN61000-3-2 (n/a @ 440 Hz)
Turn-on time
AC on 2.0 sec typ., inhibit/enable 150 ms typical
Programmable delay; 50 ms internal turn-on delay (Dual Output only)
EMI filter
Leakage current
Radiated EMI
Holdover storage
AC OK
Harmonic distortion
Isolation
CISPR 22/EN55022 Level âBâ**
300 µA max. @ 240 Vac; 47 - 63 Hz
CISPR 22/EN55022 Level âBâ**
20 ms minimum (independent of input Vac) additional 34 ms holdover
storage with optional HUP module (SEMI F47 compatible).
For iMP4 15 ms (low-line), 10 ms (high-line)
> 5 ms early warning min. before outputs lose regulation
Full cycle ride thru (50 Hz) (n/a on iMP4 > 750 W @ 90 Vac)
Meets EN61000-3-2
Meets EN60950 and EN60601
Input to output, input to ground: 2000 Vac; output to ground: 400 Vdc
Global inhibit / enable
Input fuse (internal)
Warranty
TTL, Logic â1â and Logic â0â; configurable
iMP4: 16 A; iMP8: 20 A; iMP1: 25 A (both lines fused)
2 years
|
▷ |