N1500 Datasheet, PDF (4/4 Pages) Artesyn Technologies – Single, and dual output 1500 and 2000 Watt AC/DC high wattage power supplies with PFC

MEDIUM TO HIGH POWER AC/DC POWER SUPPLIES | 1500-2000W AC/DC
1500 and 2000 Watt
AC/DC high wattage power supplies with PFC
FIG. 1
15V
10K
J1-P3
Close to Enable
FIG. 3
Open = Nominal Voltage
5V ^{Tie to +5V for High Margin}
Tie to Logic Ground (J1-11)
For Low Margin.
(J1-P12) Margin
FIG. 2 (Ref. FIG 5)
J1-P9 AC Good, J1-P14 DC OK
Low = Power/Output fail
High = Power/Output OK
External Pull-up Required
Sink Current 20mA
(On Voltage 0.7V)
FIG. 4
Output Voltage
> 10K
(J1-P8)
Sense
FIG. 5
AC Power Fail Signal/DC OK Timing
AC Input Voltage
AC Good Flag
170Vrms
0V
>10ms
DC Outputs
>5ms
DC Good Flag
STANDARD CONTROL SIGNALS
Remote enable
See Figure 1
DC OK
(See Figures 2 and 5)
Signal remains "Hi" as long as
output is ±5.0% of nominal.
AC power fail signal
(See Figure 5)
Signal "Hi" when AC >170VAC and
"Lo" when <150VAC.
Margin Hi/Lo (V1)
(See Figure 3)
Allows ±5.0% change in output
for system margin checking.
Remote Adjust
(See Figure 4)
The outputs may be remotely
adjusted linearly ±10%.
Current Monitor
Analog signal indicates load current in
single or parallel operation. 5±0.5VDC
represents FL, resistive load 10³kΩ.
http://www.artesyn.com
PAGE 4