NPS22-M Datasheet, PDF (3/3 Pages) Artesyn Technologies – Medical and ITE safety approvals

NPS20-M Series Data Sheet
Ordering Information
Model Number
Output Voltage
Minimum
Load
Maximum Load with
Convection Cooling
NPS22-M
NPS23-M
NPS24-M
NPS25-M
5V
0A
12 V
0A
15 V
0A
24 V
0A
5A
2.1 A
1.7 A
1A
NPS28-M
48 V
0A
0.52 A
Maximum Load with
200LFM Forced Air
8A
3.3 A
2.7 A
1.8 A
0.84 A
Peak Load¹ Regulation²
9A
±2%
4A
± 2%
3A
± 2%
2A
± 2%
1A
± 2%
Ripple
P/P (PARD)³
50 mV
120 mV
150 mV
240 mV
480 mV
1. Peak current lasting < 15 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3­. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as
a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System
Integrators, including through Distribution Channels. It is not intended for sale to End Users.
Pin Assignments
Connector NPS22-M NPS23-M
SK1-1
Line
Line
SK1-3
Neutral
Neutral
CN1
Ground Ground
SK2-1
+5 V
+12 V
SK2-2
+5 V
+12 V
SK2-3
Common Common
SK2-4
Common Common
SK2-5
-Sense
-Sense
SK2-6
+Sense +Sense
NPS24-M
Line
Neutral
Ground
+15 V
+15 V
Common
Common
-Sense
+Sense
NPS25-M
Line
Neutral
Ground
+24 V
+24 V
Common
Common
-Sense
+Sense
NPS28-M
Line
Neutral
Ground
+48 V
+48 V
Common
Common
-Sense
+Sense
Mating­ Connectors
AC Input
Molex 09-50-8031 (USA)
09-91-0300 (UK)
PINS: 08-52-0113
DC Outputs
Molex 09-50-8061 (USA)
09-93-0600 (UK)
PINS: 08-52-0113
Artesyn Embedded Technologies Connector Kit #70-841-006,
includes all of the above
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ± 0.02”­­(± 0.5 mm)
3. Mounting holes M1 and M2 should be grounded for EMI
purposes.
4. Mounting hole M1 is safety ground connection.
5. Specifications are for convection rating at factory settings at
115 Vac input, 25 °C unless otherwise stated.
6. For DC input an external DC safety rated fuse must be used.
7. Warranty: 2 year
8. Weight: 0.22 lbs/0.10 kg
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
[phone]
WORLDWIDE OFFICES
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
[phone]
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
[phone]
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and
service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc.
All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.
www.artesyn.com
For more information: www.artesyn.com/power
For support: [e-mail]
NPS20-M DS 21Mar2016