NPS22-M Datasheet, PDF (1/3 Pages) Artesyn Technologies – Medical and ITE safety approvals

POWER
Data Sheet
Total Power: 25 - 40 Watts
Input Voltage: 90 - 264 Vac
127 - 300 Vdc
# of Outputs: Single
SPECIAL FEATURES
ƒƒ Medical and ITE safety approvals
ƒƒ Universal input
ƒƒ Less than 1U high
ƒƒ 2” x 4” footprint
ƒƒ Remote sense
ƒƒ Overload and short circuit
protection
ƒƒ Adjustable output voltage
ƒƒ High efficiency
ƒƒ High MTBF
ƒƒ Built in EMI filter
(CISPR 22 Class B)
ƒƒ International Efficiency Level V,
Energy Star 2.0 & CeC compliant
(NPS22-M < 38 Watt output)
ƒƒ Less than 300 mW no-load power
consumption
ƒƒ 0 ˚C to +80 ˚C operation
ƒƒ Input power < 49 watts
ƒƒ Complies with EN61000-3-2
ƒƒ Class I approved
ƒƒ Class II approved (with Class A EMI)
ƒƒ LPX100 enclosure kit available
ƒƒ Dual AC fuses
ƒƒ RoHS compliant
SAFETY
ƒƒ TUV:
ƒƒ UL:
ƒƒ CSA:
ƒƒ NEMKO:
ƒƒ CB:
ƒƒ CE:
ƒƒ CQC:
60950, 60601-1
60950, 60601-1
60950, 60601-1
60950, 60601-1
Certificate and report
Mark (LVD)
Mark
NPS20-M Series
40 Watts
Electrical Specifications
Input
Input ra­nge
90 - 264 Vac (wide range) 127 - 300 Vdc
Frequency
47 - 440 Hz
Inrush current
< 50 A peak @ 230 Vac, cold start @ 25 °C
Input power
< 49 Watts
Efficiency
87% average (as per Energy Star 2.0 standard) (NPS22-M, 80%)
EMI/RFI
FCC Class B conducted; CISPR 22 Class B conducted; EN55022
Class B conducted, VDE0878PT3 Class B conducted
Safety ground
leakage current
275 µA @ 50/60 Hz; 264 Vac input
Output
Maximum power
25 W for convection. 40 W with 200LFM forced air
Adjustment range
± 20% minimum (-10%, +20% for NPS22-M)
Hold-up time
10/20 ms 115/230 Vac input line
Overload protection
Short circuit protection on all outputs. Case overload protected @
110 - 160% of normal rating, (110% - 190% for NPS28-M)
Overvoltage protection 30 - 50% above nominal output
Remote sense
Compensated for 0.5 V lead drop max. Will operate without remote
sense connected. Reverse connection protected.