N1000 Datasheet, PDF (3/4 Pages) Artesyn Technologies – Single, dual, triple and quad output 1000 and 1200 Watt AC/DC high wattage power supplies with PFC

1000-1200W AC/DC | MEDIUM TO HIGH POWER AC/DC POWER SUPPLIES
1000 and 1200 Watt
AC/DC high wattage power supplies with PFC
PIN NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
OUTPUT PIN CONNECTIONS
J1
J2
+ Sense (V1) ⁽⁴⁾
+ Sense (V2)
Current Monitor (V1) ⁽⁵⁾
- Sense (V2)
Inhibit ⁽⁵⁾
Current Share (V2)
- Sense (V1) ⁽⁴⁾
+ Sense (V4)
No Connection
- Sense (V4)
No Connection
Current Share (V4)
Current Share ⁽⁵⁾
Remote Adj. (V2) ⁽⁶⁾
Remote Adj. (V1) ⁽⁶⁾
Remote Adj. (V3) ⁽⁶⁾
AC Good ⁽⁵⁾
Remote Adj. (V4) ⁽⁶⁾
Chassis Ground
Current Share (V3)
Logic Ground
- Sense (V3)
Margin ⁽⁷⁾
+ Sense (V3)
No Connection
N/A
DC OK ^(5,8)
N/A
Mechanical notes
A AC connector is 3 position terminal block (#8 screws included), mating to
#8 ring tongue terminal.
B DC output is 5/16-18 studs mating to 5/16 terminal lugs.
C J1 signal connector is Molex 39-30-1140 or equivalent. Mating connector
is Molex 39-01-2140 or equivalent.
D J2 signal connector is Molex 39-01-1120 or equivalent. Mating connector
is 39-01-2120 or equivalent.
E Signal connector contacts are Molex 39-00-0039 or equivalent.
F Auxiliary DC output(s) are 6 position terminal block (#8 screws included)
mating to #8 ring tongue terminal.
G TB1 and J2 are not installed on single output models.
Notes
1 1000W or 1200W max. power. 500/600W max. power (V2 thru V4). All
outputs isolated.
2 Specifications refer to all outputs except as noted (V1).
3 Signal referenced to V1 output neg. sense trim.
4 Use 20AWG or larger twisted pair.
5 Reference to Logic Ground (Pin J1-11).
6 See Figure 4.
7 See Figure 3.
8 See Figure 5.
0.75
(19.05)
5.00
(127.00) _4.00
(101.60)
0.50 (12.70)
1.13
(28.70)
5.75
(146.05)
8.00
(203.2)
12.13 Max.
(308.10)
6.750
(171.450)
11.00
(279.40)
AIRFLOW
Auxiliary Outputs
(# 8 Screws)
AC Input
(# 8 Screws)
0.90 (22.86)
1.30 (33.02)
+
v
2
-
T
B
+
v
3
1
-
+
v
4
-
J
2
V2
V3
V4
V1
+
_
V1
ACH
ACN
TB1 and J2 are Not
Installed on Single
Output Models
J
1
8-32 X 0.29 (7.37) Deep (Max.)
(4) Both Sides
Main Output
5/16 - 18 Studs
50 IN-LB Torque Max.
2.80
(71.12)
0.90 (22.86)
J1
Pin 1
8-32 x 0.29 (7.37) Deep (Max.)
J2
(4) Top and Bottom
ALL DIMENSIONS IN INCHES (mm)
Pin 1
PAGE 3