LPS202-M Datasheet, PDF (2/3 Pages) Emerson Network Power – Medical and ITE safeties

LPS200-M Series Data Sheet
Environmental Specifications
Operating temperature
0 °C to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. -20 °C start up
Storage temperature
-40 °C to +85 °C
Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3
Humidity
Operating; non-condensing 10% to 95% RH
Vibration
IEC68-2-6 to the levels of IEC721-3-2
MTBF calculated
1 million hours at full load and 25 °C ambient conditions. 230 Vac input, Bellcore
Ordering Information
Model Number Output Voltage
LPS202-M
LPS203-M
LPS204-M
LPS205-M
LPS208-M
5V
12 V
15 V
24 V
48 V
Minimum
Load
0A
0A
0A
0A
0A
Maximum Load with
Convection Cooling
20 A
10.3 A
8.3 A
5.2 A
2.6 A
Maximum Load with
30CFM Forced Air
40 A
20.8 A
16.6 A
10.4 A
5.2 A
Peak Load Regulation²
44 A
22 A
18 A
11.5 A
5.8 A
± 2%
± 2%
± 2%
± 2%
± 2%
Ripple
P/P (PARD)³
50 mV
120 mV
150 mV
240 mV
480 mV
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.
2­. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3­. Peak-to-peak with 20 mHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC
compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is
not intended for sale to End Users.
Pin Assignments
Connector
LPS200-M
SK1
Pin 1
Pin 3
SK2
TB-1
TB-2
SK3
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Neutral
Line
Common
Main output
+V1 Remote sense
-V1 Remote sense
N/C
N/C
+Power fail
Common
N/C
Common
+12 V Fan
+12 Fan Return (isolated)
Mating­ Connectors
AC Input
(SK1)
Molex 09-50-8031 (connector)
PINS: 08-52-0072
AC Ground
Molex 01-90020001
DC Output (SK2) Molex 19141-0058/0063 or 19099-0044/0048
Spade lug based on Cable Ampacity/AWG
Control Sense
(SK3)
Molex 90142-0010 (USA)
PINS: 90119-2110 or
Amp: 87977-3
PINS: 87309-8
Artesyn Embedded Technologies Connector Kit #70-841-020,
includes all of the above.
1. Specifications subject to change without notice.
­2. All dimensions in inches (mm), tolerance is ± 0.02”­­(± 0.5 mm)
3. Mounting holes MH1 and MH2 should be grounded for EMI purposes.
4. Mounting hole MH1 is safety ground connection.
5. Specifications are for convection rating at factory settings at 115 VAC input, 25 °C
unless otherwise stated.
6. This power supply requires mounting on metal standoffs 0.20” (5m) in height.
7. Warranty: 2 years
8. Weight: 0.75 lb/0.34 kg