EXQ125-48S1V2J Datasheet, PDF (1/3 Pages) Artesyn Technologies – 36-100 W High Efficiency DC/DC Converters

EXQ125 Series
Single output
DC/DC CONVERTERS 36-100 W High Efficiency DC/DC Converters
• Ultra-high efficiency topology, 91% at 3.3 V,
88% typical at 1.8 V
• Industry standard footprint
• Wide baseplate temperature, -40 °C to +100 °C
• 90% to 110% output trim
• No minimum load
• Overvoltage protection
• Remote ON/OFF
• Available RoHS compliant
The EXQ125 is a new ultra high efficiency, open-frame, isolated converter series in
an industry standard quarter-brick footprint that provides up to 100 Watts of output
power. The EXQ125 delivers very high output current at low voltages, and excellent
useable power density for today’s high end applications. The seven models in the
series feature an input voltage range of 33 Vdc to 75 Vdc and are available in output
voltages of 12 V, 5 V, 3.3 V, 2.5 V, 1.8 V, 1.5 V and 1.2 V. The output voltage on each
model is adjustable from 90% to 110% of the nominal value. The EXQ125 series
also has a remote ON/OFF capability. Overcurrent and overvoltage protection
features are included as standard. With full international safety approval including
EN60950 (TÜV Rheinland) and UL/cUL1950, the EXQ125 reduces compliance costs
and time to market.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
1
TÜV
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
90% to 110%
Set point accuracy
±1.5% max.
Line regulation
Low line to high line
±0.1% max.
Load regulation
Full load to min. load
0.2% max.
Minimum load
0A
Overshoot
At turn-on and turn-off
None
Undershoot
1.2 V, 1.5 V (Z), 1.8 V (Z),
2.5 V (Z) and 3.3 V (Z) models
None
Ripple and noise
5 Hz to 20 MHz
60 mV pk-pk
20 mV rms
Transient response
(See Note 1)
2% typ. deviation
100 µs recovery to
within 1% of setpoint
INPUT SPECIFICATIONS
Input voltage range
48 Vin nominal
33-75 Vdc
Input current
No load
Remote OFF
85 mA
20 mA
Input current (max.)
(See Note 3)
3.5 A max. @ Io max.
and Vin = 33-75 Vdc
Input reflected ripple
(See Note 5)
300 mA (pk-pk) typ.
Active high remote ON/OFF
Logic compatibility
ON
OFF
Open collector ref to -input
Open circuit or >4.0 Vdc
<1.2 Vdc
Undervoltage lockout
Power up
Power down
32.5 V (typ)
30.5 V (typ)
Start-up time
(See Note 6)
Power up
Remote ON/OFF
6 ms (typ)
2 ms (typ)
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
Immunity:
ESD air
ESD contact
Radiated field enclosure
Conducted (DC power)
Conducted (signal)
Input transients
EN55022 (See Note 2)
EN55022 (See Note 2)
EN55022
Level A
Level B
Level B
EN61000-4-2 8 kV (NP), 15 kV (NP)
EN61000-4-2 6 kV (NP), 8 kV (NP)
EN61000-4-3 10 V/m (NP)
EN61000-4-6 10 V (NP)
EN61000-4-6 10 V (NP)
ETS 300 132-2, ETR 283
GENERAL SPECIFICATIONS
Efficiency
See table
Operational
Input/output
Input/baseplate
1500 Vdc
1500 Vdc
Switching frequency
Fixed
400 kHz typ.
Approvals and
standards (See Note 4)
EN60950 (TÜV Rheinland)
UL/cUL1950
Material flammability
UL94V-0
Weight
45 g (1.6 oz)
MTBF
Telcordia SR-332
@ 25 °C, 100% load
ground benign
2,284,281 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating baseplate -40 °C to +100 °C
temperature
Non-operating
-40 °C to +125 °C
File Name: exq125s.pdf Rev (02): 17 Nov 2005