BXA3 Datasheet, PDF (1/3 Pages) Artesyn Technologies – 3W Wide Input DC/DC Converters

BXA3 Series
Single and dual output
DC/DC CONVERTERS 3W Wide Input DC/DC Converters
1
• 3 Watts in DIL Package
• 9 models including 3.3VDC output
• Wide input ranges 9-18V, 18-36V, 36-75V
• EN55022 conducted emissions level A (optional)
• Continuous short circuit protection
• Operating temperature range -25°C to +105°C
• Input voltage range to ETS300-132-2
• UL, VDE and CSA safety approvals
The BXA3 Series of DC/DC converters is designed to offer the optimum
cost/benefit power solution for a wide variety of applications including public
and private telecommunications, industrial systems and process and test
equipment. The series consists of 9 models with input voltages of 9-18VDC, 18-
36VDC and 36-75VDC, and offers standard output voltages of 3.3V, 5V, 12V and
15V in single and dual output configurations. Continuous short circuit protection,
overvoltage protection, 60mV output ripple and EN55022 level A conducted
noise compliance minimize design-in time, cost and eliminate the need for
external components.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage accuracy
±1.0%
Line regulation
LL to HL, all outputs
±2.5%
Load regulation
Full load to no load
±2.5%
Ripple and noise
(5Hz to 20MHz)
+5V output
All others
60mV pk-pk, max.,
15mV rms
100mV pk-pk, max.,
15mV rms
Temperature coefficient
±0.02%/°C, max.
Over voltage protection Clamp diode
135% Vout
Short circuit protection
Continuous
automatic recovery
INPUT SPECIFICATIONS
Input voltage range
12VDC
24VDC
48VDC
9 to 18VDC
18 to 36VDC
36 to 75VDC
Input filter
Suffix ‘-F’ (See Note 5)
Pi type
Reverse voltage
(See Note 7)
Yes
protection
Max. input rise
and fall time
Output remains within
specification
5V/ms
EMC CHARACTERISTICS
Conducted emissions
EN55022, FCC part 15
Suffix ‘-F’ versions
(See Notes 5 and 6)
Level A
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input/output
500VDC
Switching frequency
Variable
200kHz to1MHz
Approvals and
standards
VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
Case material
Non-conductive
black plastic
Material flammability
UL94V-0 min.
Weight
15g (0.53oz)
MTBF
MIL-HDBK-217F
800,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating ambient -25°C to +105°C
(See derating curve)
Non-operating amb -40°C to +105°C
Cooling
Free air convection
cooled
Relative humidity
Non-condensing
5% to 95% RH
Altitude
Operating
Non operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.5G rms (approx.)
File Name: BXA3.PDF Rev: 02 Oct 2002