AQC100_16 Datasheet, PDF (2/5 Pages) Arch Electronics Corp. – Switching Power Module for PCB Mountable

AQC100 SERIES
VER : B_9 update : 2016.09.01
AC-DC Power Module
100 Watts
NOTE
1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
2. Hold-up Time measured at 90% Vout.
3. It's necessary Varistor 14S471K at L / N input side in parallel.
4. It's necessary 10R / 15φ thermistor at L input side in series connection.
5. The minimum load increases by 0.16% for every drop of one degree of temperature(at input=90~219Vac)
6. Please refer to our PDF file "AC-DC Application" on our website: www.archcorp.com.tw
MECHANICAL DIMENSION ( Top View )
PIN#
1
2
3
4
5
6
7
Φ
Single
1.2±0.1%mm
AC IN (N)
1.2±0.1%mm
AC IN (L)
1.2±0.1%mm
FG
1.2±0.1%mm
ON / OFF
(Provide +5Vdc Controlled)
1.8±0.1%mm
+DC OUT
1.8±0.1%mm
-DC OUT
1.2±0.1%mm
Trim
Remark:
Please reserve the pin 4 hole on PCB.
If the remote on/off function is not required, please
connect the pin 4 circuit layout with pin6, or keep pin
4 floating.
DERATING
http://www.archcorp.com.tw
TEL: [phone] FAX: [phone]
-2-