AP8942A_15 Datasheet, PDF (6/19 Pages) Aplus Intergrated Circuits – APLUS INTEGRATED CIRCUITS INC

Integrated Circuits Inc.
Programmable Options
aP8942A
In both Key Trigger Mode and CPU Parallel Trigger Mode, user can select different trigger
functions and output signals to be sent out from the pins OUT1 and OUT2.
Options affect all Voice Group playback are called Whole Chip Options. Options only affect the
playback of individual Voice Group are called Group Options.
Whole Chip Options
• Key or CPU Parallel Trigger Mode.
• Ramp-up-down enable or disable:
When COUT is used for playback, Ramp-up-down should be enabled. This function
eliminates the ‘POP’ noise at the beginning and end of voice playback.
When VOUT1 and VOUT2 are used to drive speaker directly, Ramp-up-down should be
disabled.
Fig. 1 Ramp-up-down Enable
Fig.2 Ramp-up-down Disable
• Output Options:
This option sets up the three output pins OUT1 and OUT2 to send out different signals
during voice playback. Four settings are allowed:
Option 1
Option 2
OUT1
LED2
STOP
OUT2
LED1
LED1
Option 3
LED1
BUSY
Note: Stop plus must be set to enable in order to have STOP plus to come out.
Ver 5.0
Fig. 3 Output waveforms
6
OCT 01, 2012