AO3413_10 Datasheet, PDF (2/5 Pages) Alpha & Omega Semiconductors – 20V P-Channel MOSFET

AO3413
Electrical Characteristics (T_J=25°C unless otherwise noted)
Symbol
Parameter
Conditions
Min Typ Max Units
BV_DSS
I_DSS
I_GSS
V_GS(th)
I_D(ON)
Drain-Source Breakdown Voltage
Zero Gate Voltage Drain Current
Gate-Body leakage current
Gate Threshold Voltage
On state drain current
R_DS(ON) Static Drain-Source On-Resistance
I_D=-250µA, V_GS=0V
-20
V
V_DS=-20V, V_GS=0V
T_J=55°C
-1
µA
-5
V_DS=0V, V_GS=±8V
±100 nA
V_DS=V_GS I_D=-250µA
-0.4 -0.65 -1
V
V_GS=-4.5V, V_DS=-5V
-15
A
V_GS=-4.5V, I_D=-3A
T_J=125°C
56
80
80
115
mΩ
V_GS=-2.5V, I_D=-2.6A
70 100 mΩ
V_GS=-1.8V, I_D=-1A
85 130 mΩ
g_FS
Forward Transconductance
V_SD
Diode Forward Voltage
V_DS=-5V, I_D=-3A
I_S=-1A,V_GS=0V
12
S
-0.7 -1
V
I_S
Maximum Body-Diode Continuous Current
-1.4 A
DYNAMIC PARAMETERS
C_iss
Input Capacitance
C_oss
Output Capacitance
V_GS=0V, V_DS=-10V, f=1MHz
560 745 pF
80
pF
C_rss
Reverse Transfer Capacitance
R_g
Gate resistance
V_GS=0V, V_DS=0V, f=1MHz
70
pF
15
23
Ω
SWITCHING PARAMETERS
Q_g
Total Gate Charge
Q_gs
Gate Source Charge
V_GS=-4.5V, V_DS=-10V, I_D=-3A
8.5 11 nC
1.2
nC
Q_gd
Gate Drain Charge
2.1
nC
t_D(on)
t_r
t_D(off)
Turn-On DelayTime
Turn-On Rise Time
Turn-Off DelayTime
7.2
ns
V_GS=-4.5V, V_DS=-10V, R_L=3.3Ω,
36
ns
R_GEN=6Ω
53
ns
t_f
Turn-Off Fall Time
t_rr
Body Diode Reverse Recovery Time ^IF^{=-3A, dI/dt=100A/µs}
Q_rr
Body Diode Reverse Recovery Charge ^IF^{=-3A, dI/dt=100A/µs}
56
ns
37
49
ns
27
nC
A: The value of R _θJA is measured with the device mounted on 1 in ² FR-4 board with 2oz. copper, in a still air environment with T_A=25°C. The
value in any given application depends on the user's specific board design. The current rating is based on the t ≤10s thermal resistance rating.
B: Repetitive rating, pulse width limited by junction temperature.
C. The R _θJA is the sum of the thermal impedence from junction to lead R _θJL and lead to ambient.
D. The static characteristics in Figures 1 to 6 are obtained using 300µs pulse width, duty cycle 0.5% max.
E. These tests are performed with the device mounted on 1 in ² FR-4 board with 2oz. Copper, in a still air environment with T _A=25°C. The SOA
curve provides a single pulse rating.
12
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev 9: July 2010
www.aosmd.com
Page 2 of 5