X3C06A4-03S Datasheet, PDF (2/25 Pages) Anaren Microwave – Very Low Loss

Model X3C06A4-03S
Rev A
Hybrid Coupler Pin Configuration
The X3C06A4-03S has an orientation marker to denote Pin 1. Once port one has been identified the other ports are
known automatically. Please see the chart below for clarification:
Configuration
Splitter
Splitter
Splitter
Splitter
Pin 1
Input
Isolated
-3dB   90
-3dB 
Pin 2
Isolated
Input
-3dB 
-3dB   90
Pin 3
-3dB   90
-3dB 
Input
Isolated
Pin 4
-3dB 
-3dB   90
Isolated
Input
*Combiner
*Combiner
*Combiner
*Combiner
A   90
A 
Isolated
Output
A 
A   90
Output
Isolated
Isolated
Output
A   90
A 
Output
Isolated
A 
A   90
*Notes: “A” is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are
applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are
not equal, some of the applied energy will be directed to the isolated port.
The actual phase, ^ , or amplitude at a given frequency for all ports, can be seen in our de-embedded s-
parameters, that can be downloaded at www.anaren.com.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Available on Tape and
Reel for Pick and Place
Manufacturing.