AAT3560_06 Datasheet, PDF (6/8 Pages) Advanced Analogic Technologies – NanoPower™ Voltage Detector

Functional Block Diagram
AAT3560/2/4
NanoPower™ Voltage Detector
VCC
+
-
+
-
V_REF
RESET (RESET)
GND
Functional Description
General
The AAT3560 series of NanoPower voltage detec-
tors monitor a system power supply and assert an
output signal (low for AAT3562 and AAT3564; high
for AAT3560) when the supply voltage drops below
a factory-programmed threshold voltage. The out-
put signal will remain valid until the input voltage
V_IN
Minimum Operating
Voltage
Output
Voltage
Ground
falls below the minimum operating voltage of 1V.
Below this value, the output voltage is undefined.
When the input voltage rises above the factory-pro-
grammed threshold, the output signal will resume
its inactive state. An active noise-suppression cir-
cuit in the AAT3560/2/4 gives the output excellent
immunity from power supply transients. See graph
titled “Maximum Transient Duration vs. Reset
Threshold Overdrive” for further information.
Detection Voltage
Level
Ground
Output Voltage
Undefined
Figure 1: AAT3562 Timing Diagram.
6
3560.2006.03.1.2