AAT3560_06 Datasheet, PDF (1/8 Pages) Advanced Analogic Technologies – NanoPower™ Voltage Detector

General Description
The AAT3560/2/4 series of PowerManager prod-
ucts are part of AnalogicTech's Total Power
Management IC™ (TPMIC™) product family.
These voltage detectors are ideal for monitoring
voltage supplies in portable systems, where
extended battery life is critical. They provide a low-
cost, reliable solution by eliminating several exter-
nal components. The AAT3560 series operates by
monitoring the system power supply voltage. When
the input voltage drops below a fixed threshold, the
device output changes state depending upon con-
figuration. When the input voltage rises above the
threshold, the device output reverts back to the pre-
vious state. The AAT3560 series is available with
three different output stages: AAT3560 push-pull
active high output; AAT3562 push-pull active low
output; and AAT3564 open drain active low output.
The quiescent supply current is extremely low, typ-
ically 1µA , making it ideal for portable battery-
operated equipment.
AAT3560/2/4 devices are available in a Pb-free,
3-pin SOT23 package and are specified over the
-40°C to +85°C operating temperature range.
Typical Application
AAT3560/2/4
NanoPower™ Voltage Detector
Features
PowerManager^™
• Input Voltage Range: 1.2V to 5.5V
• Operates Down to 1.2V
• Extremely Low Quiescent Current:
Less Than 2µA
• High Accuracy Detection Threshold: ±1.5%
• Monitor Power Supply Voltages
— Fixed Thresholds from 2.2V to 4.6V
• Active Noise Suppression
• Available Output Configurations:
— Open-Drain Output
— CMOS Active High Output
— CMOS Active Low Output
• Temperature Range: -40°C to +85°C
• 3-Pin SOT23 Package
Applications
• Battery Charger Circuits
• Battery Packs
• Data Acquisition Systems
• Intelligent Instruments
• Notebook Computers
• Portable Electronics
• Power Supplies
+
Li-Ion
DC/DC
Converter
VCC
AAT3560
AAT3562 ^RESET
AAT3564 ^(RESET)
GND
V_CC
µP
SUSPEND
3560.2006.03.1.2
1