AAT4282A Datasheet, PDF (3/14 Pages) Advanced Analogic Technologies – Dual Slew Rate Controlled Load Switch

AAT4282A
Dual Slew Rate Controlled Load Switch
Selector Guide
Part Number
AAT4282A-1*
AAT4282A-2*
AAT4282A-3
Slew Rate (Typ)
FAST (H)
SLOW (L)
1ms
0.5µs
100µs
1ms
Active
Pull-Down
NO
NO
YES
Enable
Active High
Active High
Active High
Absolute Maximum Ratings¹
Symbol
V_IN
V_EN, FAST
V_OUT
I_MAX
I_DM
T_J
T_LEAD
V_ESD
Description
IN to GND
EN, FAST to GND
OUT to GND
Maximum Continuous Switch Current
Maximum Pulsed Current
Operating Junction Temperature Range
Maximum Soldering Temperature (at leads)
ESD Rating² – HBM
Duty Cycle ≤ 10%
Value
-0.3 to 7
-0.3 to 7
-0.3 to V_IN + 0.3
3
5.5
-40 to 150
300
4000
Units
V
V
V
A
A
°C
°C
V
Thermal Characteristics³
Symbol
θ_JA
P_D
Description
Thermal Resistance
Maximum Power Dissipation
Value
70
1.78
Units
°C/W
W
1. Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at condi-
tions other than the operating conditions specified is not implied. Only one Absolute Maximum Rating should be applied at any one time.
2. Human body model is a 100pF capacitor discharged through a 1.5kΩ resistor into each pin.
3. Mounted on a AAT4282A demo board in still 25°C air.
4282A.2007.09.1.1
3