AAT2514_08 Datasheet, PDF (14/14 Pages) Advanced Analogic Technologies – Dual Channel 600mA Step-Down Converter

SwitchReg^TM
PRODUCT DATASHEET
AAT2514
Dual Channel 600mA Step-Down Converter
Ordering Information
Output Voltage¹
Adj. 0.6V to V_IN
Package
TDFN33-10
Marking²
ZBXYY
Part Number (Tape & Reel)³
AAT2514IDE-AA-T1
All AnalogicTech products are offered in Pb-free packaging. The term “Pb-free” means semiconductor
products that are in compliance with current RoHS standards, including the requirement that lead not exceed
0.1% by weight in homogeneous materials. For more information, please visit our website at
http://www.analogictech.com/about/quality.aspx.
Package Information⁴
TDFN33-10
0.23 ± 0.05 0.500 BSC
Pin 1 dot by marking
3.00 ± 0.05
Top View
Pin 1 identification
R0.200
0.40 ± 0.05
2.40 ± 0.05
Bottom View
All dimensions in millimeters.
0.05 ± 0.05
Side View
1. Please contact Sales for other voltage options.
2. XYY = assembly and date code.
3. Sample stock is generally held on part numbers listed in BOLD.
4. The leadless package family, which includes QFN, TQFN, DFN, TDFN and STDFN, has exposed copper (unplated) at the end of the lead terminals due to the manufacturing
process. A solder fillet at the exposed copper edge cannot be guaranteed and is not required to ensure a proper bottom solder connection.
Advanced Analogic Technologies, Inc.
3230 Scott Boulevard, Santa Clara, CA 95054
Phone [phone]
Fax [phone]
© Advanced Analogic Technologies, Inc.
AnalogicTech cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in an AnalogicTech product. No circuit patent licenses, copyrights, mask work rights, or other intellectual
property rights are implied. AnalogicTech reserves the right to make changes to their products or specifications or to discontinue any product or service without notice. Except as provided in AnalogicTech’s terms and
conditions of sale, AnalogicTech assumes no liability whatsoever, and AnalogicTech disclaims any express or implied warranty relating to the sale and/or use of AnalogicTech products including liability or warranties
relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. In order to minimize risks associated with the customer’s applications, adequate
design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. Testing and other quality control techniques are utilized to the extent AnalogicTech deems necessary to
support this warranty. Specific testing of all parameters of each device is not necessarily performed. AnalogicTech and the AnalogicTech logo are trademarks of Advanced Analogic Technologies Incorporated. All other
brand and product names appearing in this document are registered trademarks or trademarks of their respective holders.
14
www.analogictech.com
2514.2008.02.1.1