AAT3111 Datasheet, PDF (1/16 Pages) Advanced Analogic Technologies – MicroPower™ Regulated Charge Pump

AAT3111
MicroPower™ Regulated Charge Pump
General Description
Features
ChargePump^™
The AAT3111 ChargePump™ is a MicroPower
switched-capacitor voltage converter that delivers
a regulated output. No external inductor is required
for operation. Using three small capacitors, the
AAT3111 can deliver up to 150mA to the voltage
regulated output. The AAT3111 features very low
quiescent current and high efficiency over a large
portion of its load range making this device ideal
for battery-powered applications. Furthermore, the
combination of few external components and small
package size keeps the total converter board area
to a minimum in space restricted applications. The
AAT3111 operates in an output-regulated voltage
doubling mode. The regulator uses a pulse-skip-
ping technique to provide a regulated output from a
varying input supply. The AAT3111 contains a ther-
mal management circuit to protect the device
under continuous output short circuit conditions.
The AAT3111 is available in a surface mount 6-pin
SOT23 or 8-pin SC70JW package and is rated
from -40 to 85°C.
The AAT3111 ChargePump™ is a member of
AnalogicTech's Total Power Management IC prod-
uct family.
• Step-up type voltage converter
• Input Range
• AAT3111-3.6: 1.8V to 3.6V
• AAT3111-3.3: 1.8V to 3.3V
• MicroPower consumption: 20µA
• 3.6V, 3.3V Regulated ±4% output
• 3.6V Output Current
• 100mA with V_IN ≥ 3.0V
• 20mA with V_IN ≥ 2.0V
• 3.3V Output Current
• 100mA with V_IN ≥ 2.5V
• 20mA with V_IN ≥ 1.8V
• High Frequency 750 kHz operation
• Shutdown mode draws less than 1µA
• Short-circuit/over-temperature protection
• 2kV ESD Rating
• SC70JW-8 or SOT23-6 package
Applications
• Handheld Electronics
• Digital Cameras
• PDAs
• Battery Back Up Supplies
• MP3 Players
Typical Application
V_OUT
C_OUT
10uF
ON/OFF
AAT3111
V_OUT
C+
GND
V_IN
SHDN
C-
1uF
V_IN
C_IN
10uF
3111.2002.3.0.91
1