AWT6302R Datasheet, PDF (5/10 Pages) ANADIGICS, Inc – PCS/CDMA 3.4V/28dBm Linear Power Amplifier Module

Table 5: Electrical Specifications
(TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = +2.85 V, 50 Ω system)
AWT6302R
PARAMETER
MIN TYP MAX UNIT COMMENTS
Gain
24
26
28
22 24.5 27
dB
POUT = +28 dBm
POUT = +16 dBm
Adjacent Channel Power
at +1.25 MHz offset
Primary Channel BW - 1.23 MHz
Adjacent Channel BW = 30 kHz
-
-
-52 -47
-51 -47
dBc
POUT = +28 dBm
POUT = +16 dBm
Adjacent Channel Power
at +2.25 MHz offset
Primary Channel BW - 1.23 MHz
Adjacent Channel BW = 30 kHz
-
-
-61 -57
-69 -57
dBc
POUT = +28 dBm
POUT = +16 dBm
Power-Added Efficiency
37
40
-
8.3
9
-
%
POUT = +28 dBm
POUT = +16 dBm
Quiescent Current (Icq)
-
48
62
mA VMODE = +2.85 V
Reference Current
-
2.3
4
mA through VREF pin, PA "on"
Mode Control Current
-
0.3
1.0
mA through VMODE pin
Leakage Current
-
<1
5
µA
VCC = +4.2 V, VREF = 0 V,
VMODE = 0 V
Noise in Receive Band
-
-132 -130 dBm/Hz 1930 MHz to 1990 MHz
Harmonics
2fo
3fo, 4fo
-
-
-40 -30
-55 -30
dBc
Input Impedance
-
-
2.5:1 VSWR
Spurious Output Level
(all spurious outputs)
POUT < +28 dBm
-
-
-65
dBc
In-band load VSWR < 5:1
Out-of-band load VSWR < 10:1
Applies over all operating ranges
Load mismatch stress with no
permanent degradation or failure
8:1
-
- VSWR Applies over full operating range
Notes:
1. ACPRs and Efficiency Limits at mid-band only.
Data Sheet - Rev 2.1
5
09/2008