ARA2000_11 Datasheet, PDF (4/21 Pages) ANADIGICS, Inc – Address-Programmable Reverse Amplifier with Step Attenuator

ARA2000
electrical characteristics
pARAMeteR
Table 2: Absolute Minimum and Maximum Ratings
Min
MAX
Analog Supply (pins 2, 4, 9, 21, 24)
0
9
Digital Supply: VCMOS (pin 11)
0
6
Amplifier Controls Vg1, Vg2 (pins 6, 23)
-5
2
RF Power at Inputs (pins 5, 8)
-
+60
Digital Interface (pins 12, 13, 14, 15, 16)
-0.5
VCMOS+0.5
Storage Temperature
-55
+200
Soldering Temperature
-
260
Soldering Time
-
5
Stresses in excess of the absolute ratings may cause permanent damage. Functional
operation is not implied under these conditions. Exposure to absolute ratings for extended
periods of time may adversely affect reliability.
Notes:
1. Pins 3, 5, 8, 10, 19, 20, 25 and 26 should be AC-coupled. No external DC bias should be
applied.
2. Pins 7 and 22 should be grounded or pulled to ground through a resistor. No external DC
bias should be applied.
unit
VDC
VDC
V
dBmV
V
C
C
Sec
pARAMeteR
Table 3: Operating Ranges
Min
tYp
MAX
unit
Amplifier Supply: VDD (pins 4, 9,21,24)
4.5
5.0
7.0
VDC
Attenuator Supply: VATTN (pin 2)
VDD -0.5
5.0
7.0
VDC
Digital Supply: VCMOS (pin 11)
3.0
-
5.5
VDC
Digital Interface (pins 12, 13, 14, 15,16)
0
-
VCMOS
V
Amplifier Controls Vg1, Vg2 (pins 6, 23)
-5
1
2
V
Case Temperature
-40
25
85
C
The device may be operated safely over these conditions; however, parametric performance is
guaranteed only over the conditions defined in the electrical specifications.
4
Data Sheet - Rev 2.3
04/2011