ALT6720 Datasheet, PDF (3/9 Pages) ANADIGICS, Inc – HELP4 E800 (Band 20) LTE Linear PAM

ALT6720
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN MAX UNIT
Supply Voltage (VCC)
0
+5.0
V
Battery Voltage (VBATT)
0
+6
V
Control Voltages (VMODE1, VMODE2, VEN)
0
+3.5
V
RF Input Power (PIN)
-
+10
dBm
Storage Temperature (TSTG)
-40 +150
°C
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Table 3: Operating Ranges
PARAMETER
MIN TYP MAX UNIT
COMMENTS
Operating Frequency (f)
832
-
862
MHz
Supply Voltage (VCC)
+3.1 +3.4 +4.35
V
POUT ≤ +27.5 dBm
Enable Voltage (VEN)
+1.35 +1.8 +3.1
0
-
+0.5
V
PA "on"
PA "shut down"
Mode Control Voltage (VMODE1,VMODE2)
+1.35
0
+1.8
-
+3.1
+0.5
V
Low Bias Mode
High Bias Mode
LTE/UMTS Output Power ^{(1, 2, 3)}
LTE (MPR=0), HPM
LTE (MPR=0), MPM
LTE (MPR=0), LPM
26.7 27.5
-
-
16.0
-
-
7.0
-
dBm TS 36.101 Rel 8
Case Temperature (TC)
-40
-
+90
°C
The device may be operated safely over these conditions; however, parametric performance is guaranteed only over
the conditions defined in the electrical specifications.
Notes:
(1) LTE waveform characteristics up to 20 MHz QPSK, 18 RB’s.
(2) For 3.1 V operation POUT derated 0.8 dB.
(3) For operation at +105 °C, POUT is derated by 1.0 dB.
3
Data Sheet - Rev 2.3
03/2012