CCS801 Datasheet, PDF (7/7 Pages) ams AG – Cambridge CMOS Sensors (CCS) micro-hotplate technology provides

CC-000015-DS revision: 11
Datasheet for CCS801
Ordering Information
Part Number
CCS801B-COPR
CCS801B-COPS
Description
CCS801B Multi-gas sensor for indoor air
quality monitoring
Samples of CCS801B Multi-gas sensor for
indoor air quality monitoring
Package
2x3mm DFN
MOQ
5000
2x3mm DFN
100
Notes:
1. Refer to JEDEC J-STD020 lead-free standard for typical soldering reflow profile
2. Refer to application note CC-000090-AN on device assembly guidelines
3. Refer to application note CC-000018-AN on CCS80x hardware design guidelines.
The contents of this document are subject to change without notice. While every care has been taken to ensure the accuracy of the contents of this document,
CCS cannot accept responsibility for any errors. CCS products are not designed, authorized or warranted for use in medical, military, aircraft, space or life
support equipment, nor in applications where failure or malfunction of a CCS product can reasonably be expected to result in personal injury, death or severe
property or environmental damage. CCS accepts no liability for inclusion and/or use of CCS products in such equipment or applications and therefore such
inclusion and/or use, is at the customer’s own risk. As any devices operated at high temperature have inherently a certain rate of failure, it is therefore necessary
to protect against injury, damage or loss from such failures by incorporating appropriate safety measures. CCS products are not designed to work in condensing
high humidity environments
Page | 6
© Cambridge CMOS Sensors Ltd, Deanland House, Cowley Road, Cambridge, CB4 0DL, UK
Website: www.ccmoss.com
Telephone: [phone]
Date Issued: 26 May 2016