TMD2620 Datasheet, PDF (5/33 Pages) ams AG – The device is an advanced proximity sensor

TMD2620 − Electrical Characteristics
Electrical Characteristics
Figure 6:
Recommended Operating Conditions
Symbol
V_DD
V_LEDA
T_A
Parameter
Supply voltage
Voltage supplied to LEDA pin
Operating free-air temperature ⁽¹⁾
Min
Typ
Max Units
1.7
1.8
2.0
V
3.3
V
-30
85
°C
Note(s):
1. While the device is operational across the temperature range, performance will vary with temperature. Operational characteristics are at
25°C, unless otherwise noted.
Figure 7:
Operating Characteristics, V_DD = 1.8 V, T_A = 25ºC (unless otherwise noted)
Symbol
Parameter
f_OSC Oscillator frequency
IDD
Supply current ⁽¹⁾
VOL INT, SDA output low voltage
Conditions
Min Typ Max Units
8.0
MHz
Idle state
(PON=1, PEN=0) ⁽²⁾
30
μA
Sleep state ⁽³⁾
0.7 5.0
μA
6 mA sink current
0.6
V
ILEAK Leakage current, SDA, SCL, INT pins
VIH SCL, SDA input high voltage
VIL SCL, SDA input low voltage
-5
5
μA
1.26
V
0.54
V
Note(s):
1. Values are shown at the VDD pin and do not include current through the IR LED.
2. Idle state occurs when PON=1 and all functions are not enabled.
3. Sleep state occurs when PON = 0 and I²C bus is idle. If Sleep state has been entered as the result of operational flow, SAI = 1, PON will remain
high.
ams Datasheet
[v1-01] 2016-Aug-02
Page 5
Document Feedback