HPS-100 Datasheet, PDF (4/24 Pages) ams AG – Automotive Hydrogen Sensor

HPS-100− Overview
Installation
The HPS-100 is designed for process connection with metric
straight screw thread with o-ring M14x1.5 in accordance with
ISO 6149-3 (stud end) and to fit into ISO 6149-1 (port).
Recommended O-ring, 11.3±0.2, 2.2±0.08 or 11.3±0.2, 2.4±0.08
EPDM 70 “Peroxide crosslinked” or FPM 75 (Viton)
Note(s): The O-ring is currently part of the delivery
Recommended torque for fixation: 15 Nm (+10% -0%) acc.
ISO 6149-3
Recommended orientation of the sensor, see below.
Figure 4:
Recommended Mounting Position of the Sensor
Page 4
Document Feedback
ams Datasheet
[v1-00] 2015-Apr-06