TSL1401CCS Datasheet, PDF (1/29 Pages) ams AG – Enables High-Resolution Edge Detection

TSL1401CCS
128 × 1 Linear Sensor Array With Hold
General Description
The TSL1401CCS linear sensor array consists of a 128 × 1 array
of photodiodes, associated charge amplifier circuitry, and a
pixel data-hold function that provides
simultaneous-integration start and stop times for all pixels. The
pixels measure 63.5μm (H) by 55.5μm (W) with 63.5μm
center-to-center spacing and 8μm spacing between pixels.
Operation is simplified by internal control logic that requires
only a serial-input (SI) signal and a clock.
Ordering Information and Content Guide appear at end of
datasheet.
Figure 1:
Added Value of Using TSL1401CCS
Key Benefits & Features
The benefits and features of the TSL1401CCS linear sensor array,
are listed below:
Benefits
• Enables High-Resolution Edge Detection
• Supports High Resolution OCR, Bar Code Reading
• Facilitates Grey Scale Scanning and Accurate
Positioning
• Usable Over a Wide Range of Light Levels
• Simplifies ADC Interface
• Minimal Smearing of Moving Images
• Allows High Scan Rate for Faster Throughput
• No Special Power Supply Required
• Utilizes Full ADC Input Range
• Minimizes Component Count
• Small Form Factor and Footprint
• Compatible With Most Process Flows
Features
• 128 × 1 Sensor-Element Organization
• 400 Dots-Per-Inch (DPI) Sensor Pitch
• High Linearity and Uniformity
• Wide Dynamic Range... 4000:1 (72dB)
• Output Referenced to Ground
• Low Image Lag... 0.5% Typ
• Operation to 8MHz
• Single 3V to 5V Supply
• Rail-to-Rail Output Swing
• No External Load Resistor Required
• Available in a Solder-Bump Linear Array
Package
• Lead (Pb) Free and RoHS Compliant
ams Datasheet
[v1-00] 2016-Jan-18
Page 1
Document Feedback