10-69518-11S Datasheet, PDF (5/70 Pages) Amphenol Corporation – Amphenol QWL Series Cylindrical Connectors

QWL
how to order
QWL heavy duty cylindrical connectors are ordered by Amphenol^® part number only. To
illustrate the ordering procedure, part number 10-107628-5P is shown as follows:
See code below:
PART NUMBER
10 - 107 6 28-5 P
1 23 4 5
1. Base Number Prefix - used to define contact type and finish.
10- Solder type contacts, silver plated (Standard)
75- Crimp type contacts, silver plated
81- Crimp type contacts, plated .0001 gold over silver
82- Crimp type contacts for MIL-C-13777 cable, silver plated
83- Crimp type contacts for MIL-C-13777 cable, plated .0001 gold over silver
85- Crimp type contacts plated .00005 gold over silver
2. Base Number - QWL Series Heavy Duty Cylindrical Connector.
3. Shell Style -
0 designates wall mount receptacle
1 designates cable connecting plug
2 designates box mount receptacle
3 designates jam nut receptacle with rear accessory threads (wall mount)
4 designates thru bulkhead receptacle
6 designates straight plug
7 designates flange mount plug
9 designates jam nut receptacle (box mount)
4. Shell Size/Insert Arrangement - Amphenol^® QWL connectors are available in equivalent MS shell
sizes with all current MS insert arrangements as well as a large selection of special arrangements for
power and signal circuits. Select the required insert arrangement number from those shown on pages
18-40.
5. Contact Type/Alternate Insert Rotations - P for pin, S for socket. When an alternate position of
the connector insert is required to prevent cross mating of connectors, a different letter (other than P or
S) is used. Select from the table below the Amphenol^® letter which indicates both type of contact, and
insert rotation desired. Refer to page 17 for alternate insert rotations.
PIN CONTACTS
MS
LETTERS
AMPHENOL^®
LETTER
P
P (normal)
PW
G
PX
I
PY
K
PZ
M
SOCKET CONTACTS
MS
LETTERS
AMPHENOL^®
LETTER
S
S (normal)
SW
H
SX
J
SY
L
SZ
N
4