B05 Datasheet, PDF (4/4 Pages) DB Lectro Inc – FEMALE HEADER PROFILE : 6.6mm STRAIGHT

Material System (Table B)
Code
Letter
E
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
D
D
R vs T
Curve
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
25/125
Ratio
5.0
11.8
12.5
14
16.9
19.8
22.1
22.7
29.4
30.8
32.3
35.7
38.1
45
48.1
56.5
75.6
81
Nominal Resistance Range
at 77°F (25°C)
B35
B43
30 to 51 Ω
30 to 51 Ω
51 to 150 Ω
51 to 150 Ω
150 to 360 Ω
150 to 360 Ω
360 to 750 Ω
360 to 750 Ω
750 to 1.5 kΩ
750 to 1.5 kΩ
1.5 to 3.6 kΩ
1.5 to 3.6 kΩ
3.6 to 6.2 kΩ
3.6 to 6.2 kΩ
6.2 to 9.1 kΩ
6.2 to 9.1 kΩ
9.1 to 27 kΩ
9.1 to 27 kΩ
27 to 43 kΩ
27 to 43 kΩ
43 to 75 kΩ
43 to 75 kΩ
75 to 160 kΩ
75 to 160 kΩ
160 to 360 kΩ
160 to 360 kΩ
360 to 750 kΩ
360 to 750 kΩ
750 to 1.5 MΩ
750 to 1.5 MΩ
1.5 to 3.0 MΩ
1.5 to 3.0 MΩ
3.0 to 8.2 MΩ
3.0 to 8.2 MΩ
8.2 to 20 MΩ
8.2 to 20 MΩ
Thermal Time Constant
B35
• Still air at 77°F (25°C): 4.5 second
• Plunge into water: 100 msec
B43
• Still air at 77°F (25°C): 5.5 second
• Plunge into water: 140 msec
Dissipation Constant
B35
• Still air at 77°F (25°C): 0.30 mW/°C
• Still water at 77°F (25°C): 1.50 mW/°C
B43
• Still air at 77°F (25°C): 0.35 mW/°C
• Still water at 77°F (25°C): 2.00 mW/°C
Power Rating (In Air)
B35
• Maximum Power Rating: 0.035 W
• 100% Maximum Power To: 302°F (150°C)
B43
• Maximum Power Rating: 0.035 W
• 100% Maximum Power To: 302°F (150°C)
• Derated to 0% at: 572°F (300°C)
Options
• Non-standard resistance tolerances
• Non-standard resistance values
• Reference temperature(s) other than 77°F (25°C) - specify
• Mounting in special housings or enclosures
• Longer continuous leads
• Welded or soldered extension leads - specify lead material,
diameter, length, and insulation, if any
• Solderable or weldable/solderable leads
• Calibration - specify temperature(s)
• Interchangeable pairs or sets, R-vs-T curve matching; specify
temperature range(s) and tolerance(s)
• Special aging and conditioning for high reliability applications
Ordering Information
The code number to be ordered may be specified as follows:
Code Type
B
Glass coated bead structure
Code
05
07
10
14
35
43
Diameter
05 mils
07 mils
10 mils
14 mils
35 mils
43 mils
Code

J

K

P
Lead Configuration
Adjacent leads
Adjacent leads with stub ends glass coated
Opposite leads
Code

X
Material System Code
See table A or table B for code number
Code

X

Power
Zero-power resistance as 77°F
(25°C) (see note 2 for code number)
Code
F
G
J
K
L
M
N
P
Q
R
S
Tolerance*
1
2
5
10
15
20
25
30
40
50
Non-standard (consult factory)
B - ____ - ____ - ____ - ____ - ____ Typical model number
Special tolerances are available upon request. Consult factory for special resistance tolerances, non-
standard resistances and/or non-standard temperatures.
*The zero-power resistance at 77°F (25°C), expressed inΩ, is identified by a
three digit code number. The first two digits represent significant figures, and
the last digit specifies the number of zeros to follow. Example: 10k Ω= “103”.
The standard resistance values are from the 24-Value series decade as specified
in Military Standard MS90178.
1.0 / 1.1 / 1.2 / 1.3 / 1.5 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 2.7 / 3.0
3.3 / 3.6 / 3.9 / 4.3 / 4.7 / 5.1 / 5.6 / 6.2 / 6.8 / 7.5 / 8.2 / 9.1
Amphenol
Advanced Sensors
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-177B - 09/2014