B05 Datasheet, PDF (1/4 Pages) DB Lectro Inc – FEMALE HEADER PROFILE : 6.6mm STRAIGHT

NTC Type B Series
Glass Coated Bead
Thermistors
Features
Type B05/07/10/14
Small glass coated bead thermistors on fine diameter
platinum alloy lead-wires.
Type B35/43
Large glass coated bead thermistors on fine diameter
platinum alloy lead-wires.
• Extremely small sizes
• Very fast thermal response times
• Low heat capacity and high power sensitivity
• Special thin glass coatings provide hermetic seal
• Suitable for self-heated applications such as: gas
chromatography, thermal conductivity analysis or gas
flow measurement
• Normal operating/storage temperatures range from
• -112°F (-80°C) to: 221°F (105°C) for Material system
E0, 392°F (200°C) for Material systems A1 through A4,
572°F (300°C) for Material systems A5 through D17
• Unaffected by severe environmental exposures,
including nuclear radiation
• Intermittent operation to 1112°F (600°C) is permissible,
however, stability will be degraded
• Suitable for most low cost temperature measurement,
control or compensation applications.
• Special thin glass coatings provide hermetic seal
• Suitable for self-heated applications such as liquid level
sensing or gas flow measurement
• Normal operating/storage temperatures range from
• -112°F (-80°C) to: 221°F (105°C) for Material system
E0, 392°F (200°C) for Material systems A1 through A4,
572°F (300°C) for Material systems A5 through D17
• Unaffected by severe environmental exposures,
including nuclear radiation
• Intermittent operation to 1112°F (600°C) is permissible,
however, stability will be degraded
Amphenol
Advanced Sensors