M39029 Datasheet, PDF (16/17 Pages) Amphenol Corporation – Amphenol /Matrix MIL-C-26482, Series 2 Connectors

Additional Miniature Cylindrical Connectors
offered by Amphenol
Miniature Cylindrical
Proprietary/MIL-C-26482, Series 1 & 2
Connectors
There are several additional connector series within
the Amphenol^® MIL-C-26482 and similar types fam-
ily. Each series offers varying design characteris-
tics and customer options to meet cost
considerations and to provide users with the most
design flexibility possible.
The additional series within the Amphenol Miniature Cylindrical
Family of Connectors are shown in detail in Amphenol catalog
12-070, which can be supplied upon request. Briefly these addi-
tional products are described as follows:
• PT, SP, MS/PT
Proprietary/MIL-C-26482, Series 1
These are bayonet type with solder contacts. Both the insert
and main joint gasket are molded from resilient neoprene.
This provides excellent moisture sealing at the gasket and
superior electrical isolation of the contact in the inserts.
Socket contacts are closed entry design. Printed circuit
board contacts are also available in this series.
The SP is a modification of the PT providing special shells
with a wide mounting flange for back panel mounting. The
SP also has a durable non-conductive hard anodic “Alumi-
lite” coating which provides abrasion and corrosion protec-
tion.
There are 8 shell styles in the PT, SP and MS/PT series, and
shell sizes are 6-24. The PT solder is UL recognized. Her-
metics are also available.
• PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-C-26482, Series 1
These are a derivative of the PT line, bayonet type. How-
ever, they incorporate crimp contacts that are rear insert-
able, front releasable. An MS approved spring tower
retention system holds the contacts in place.
• PT-CE, SP-CE
Proprietary crimp type
Another derivative of the PT line, bayonet type. These also
have crimp contacts that are rear insertable, front releas-
able, but the contacts are held in place by a nylon wafer
retention system. The voidless one-piece insert and grom-
met assembly provide continuous dielectric separation
between contacts.
• PC, PC-SE, PC-CE
Proprietary solder and crimp type
The PC series within the Amphenol^® miniature cylindrical
family is threaded coupling, rather than bayonet coupling.
The threads are double-stubbed so they can not be cross
threaded.
The PC is offered with solder contacts. The PC-SE has
crimp contacts in a spring tower retention system, while the
PC-CE has crimp contacts in a nylon wafer retention system.
Hermetics are available
All miniature cylindricals are intermateable and intermountable
with each other except for the threaded coupling PC Series.
For further information ask for catalog 12-070. Consult Amphe-
nol, Sidney, NY for any assistance on these products or for any
specific application needs.
15