M39029 Datasheet, PDF (15/17 Pages) Amphenol Corporation – Amphenol /Matrix MIL-C-26482, Series 2 Connectors

MIL-C-26482, Series 2
how to order
HOW TO ORDER BY MILITARY PART NUMBER
MIL-C-26482 SERIES 2 CONNECTORS
MS 3470 W 12 10 P W
1
2
34567
1. Connector Type
MS designates Military Standard
2. Connector Style
3470 wall mounting receptacle with narrow flange
3472 wall mounting receptacle with wide flange
3471 cable connecting receptacle
3474 jam nut receptacle
3476 straight plug
3475 straight plug with RFI grounding fingers
3. Service Class
L aluminum shell, electroless nickel finish, fluid
resistant insert
A aluminum shell, black anodized finish, non-conduc-
tive fluid resistant insert
W aluminum shell, olive drab cadmium plated, fluid
resistant insert
Note: For stainless steel shell, passivated, order by Amphenol^®/Matrix^®
proprietary Class G.
Class L inactivates older classes E and R (Ref. MIL-C-26482)
4., 5. Shell size and insert arrangement - See chart on page 9
and pattern drawings that follow.
6. Contact Types
P designates pin
S designates socket
A designates less pins
B designates less sockets
Note: Use A & B only when other than a full complement of power con-
tacts is to be installed.
7. Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 9 for description of alternate
positions.
HOW TO ORDER BY PROPRIETARY PART NUMBER
MIL-C-26482 SERIES 2 CONNECTORS
MB1 0 W 12 10 P W ***
12 3 4 5 6 78
1. Connector Type
MB1 designates Amphenol^®/Matrix^® Bayonet Coupling
Connector
2. Connector Style
0 wall mounting receptacle with narrow flange
1 wall mounting receptacle with wide flange
3 cable connecting receptacle
4 jam nut receptacle
6 straight plug
8 straight plug with RFI grounding fingers
3. Service Class
A aluminum shell, black anodize finish, non-conduc-
tive, fluid resistant insert
R aluminum shell, electroless nickel finish, fluid
resistant insert
G stainless steel shell, passivated, fluid resistant
insert
W aluminum shell, cadmium plated, olive drab finish,
fluid resistant insert
4., 5. Shell size and insert arrangement - See chart on page 9
and pattern drawings that follow.
6. Contact Types
P designates pin
S designates socket
7. Insert Rotation
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell
from normal position. No letter required for normal (no
rotation) position. See page 9 for description of alternate
positions.
8. Modification Number
Consult Amphenol, Sidney, NY for information.
For strain reliefs use the following modification codes:
(189) E-nut M85049/31 configuration
(190) Straight strain relief M85049/52 configuration
(191) 90° strain relief M85049/51 configuration
For ordering information on accessories, such as protection
caps and backshell hardware, contact Amphenol, Sidney, NY.
14