AMIS-30622 Datasheet, PDF (34/35 Pages) AMI SEMICONDUCTOR – I2C Microstepping Motordriver

AMIS-30622 I²C Microstepping Motordriver
Data Sheet
10.0 Features
10.1 Position Periodicity
Depending on the stepping mode the position can range
between –4096 to +4095 in half-step mode to –32768 to
+32767 in 1/16^th microstepping mode (see § 8.5.1 Position
Ranges) one can project all these positions lying on a circle.
When executing the command SetPosition the position
controller will set the movement direction in such a way that
the traveled distance is minimum.
As an example in the figure below is illustrated the moving
direction going from ActPos = +32700 to SetPos =
–32700 is counter clockwise.
If a clockwise motion is required in this example, several
consecutive SetPosition commands can be used.
11.0 Resistance to Electrical and Electromagnetic Disturbances
11.1 Electrostatic Discharges
See. § 1.1 Absolute Maximum Ratings
11.2 Schäffner Pulses
Shäffner pulses are applied to the power supply wires of the
equipment implementing the AMIS-30622 (see application
schematic), according to Renault 36-00-808/--E document.
Pulse
#1
#2a
#3a
#3b
#5b (load dump)
Amplitude
-100V
+100V
-150V (from +13.5V)
+100V (from +13.5V)
+21.5V (from +13.5V)
Rise Time
≤ 1µs
≤ 1µs
5ns
5ns
≤ 10ms
Pulse Duration
2ms
50µs
100ns (burst)
100ns (burst)
400ms
Rs
10Ω
2Ω
50Ω
50Ω
≤ 1Ω
11.3 EMC
Bulk current injection (BCI), according to Renault 36-00-
808/--E document (p61).
Current
60mA
100mA
200mA
Opertaing Class
A
B
C
Operating Class
C
B
A
A
C
AMI Semiconductor - Rev. 2.3
www.amis.com
34