AMIS-710411 Datasheet, PDF (3/7 Pages) AMI SEMICONDUCTOR – 400dpi CIS Module

AMIS-710411-A7: 400dpi CIS Module
Data Sheet
4.0 Pin Out Description
There is a connector located at the end of the module. The outline of the module in Figure 4 of the mechanical section illustrates the
connector location. With the module window facing down on a flat surface, the viewer looking down on backside of the module and the
connector's pins facing the viewer, the connector is located on the right-hand end of the module. The connector is a surface-mount-flex
input, Molex 52207-0890, 1mm single 10-pin row. Its I/O designation is provided in Table 1. The location of Pin number 1 is found
closest to end of the module.
Table 1: I/O Designation
Pin Number
1
2
3
4
5
6
7
8
9
10
Symbol
Vout
Gnd
Vdd (+5V)
NA
Gnd
SP
Gnd
CP
GLED
VLED
Names and Functions
Analog video output
Ground; 0V
Positive power supply
Not used
Ground; 0V
Shift register start pulse
Ground; 0V
Sampling clock pulse
Ground for the light source
Supply for the light source
5.0 Absolute Maximum Rating
Table 2 shows the absolute maximum parameters. These parameters should not be used in prolonged operation.
Table 2: Absolute Maximum Rating
Parameter
Power supply
Input clock pulse (high)
Input clock pulse (low)
Symbols
Vdd
Idd
VLED
ILED
Vih
Vil
Maximum Rating
7.0
5.7
50
300
Vdd
-0.5
Units
V
mA
V
mA
V
V
6.0 Operating Environment
Table 3: Operating Environment
Parameter
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Symbols
Top
Hop
Tstg
Hstg
Maximum Rating
0 to 50
10 to 85
-25 to 85
5 to 95
Units
°_C
%
°_C
%
AMI Semiconductor – July 06, M-20593-001
3
www.amis.com