AM29LV128MH_07 Datasheet, PDF (44/66 Pages) Advanced Micro Devices – 128 Megabit (8 M x 16-Bit/16 M x 8-Bit) MirrorBit™ 3.0 Volt-only Uniform Sector Flash Memory with VersatileI/O™ Control

DATA SHEET
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Plastic Packages . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground
V_CC (Note 1) . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V
V_IO. . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V
A9, OE#, ACC, and RESET#
(Note 2) . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V
All other pins (Note 1) . . . . . . –0.5 V to V_CC +0.5 V
Output Short Circuit Current (Note 3) . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V.
During voltage transitions, input or I/O pins may
overshoot V_SS to –2.0 V for periods of up to 20 ns.
Maximum DC voltage on input or I/O pins is V_CC +0.5 V.
See Figure 10. During voltage transitions, input or I/O
pins may overshoot to V_CC +2.0 V for periods up to 20 ns.
See Figure 11.
2. Minimum DC input voltage on pins A9, OE#, ACC, and
RESET# is –0.5 V. During voltage transitions, A9, OE#,
ACC, and RESET# may overshoot V_SS to –2.0 V for
periods of up to 20 ns. See Figure 10. Maximum DC
input voltage on pin A9, OE#, ACC, and RESET# is
+12.5 V which may overshoot to +14.0 V for periods up
to 20 ns.
3. No more than one output may be shorted to ground at a
time. Duration of the short circuit should not be greater
than one second.
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. This
is a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to absolute maximum rating
conditions for extended periods may affect device reliability.
+0.8 V
–0.5 V
–2.0 V
20 ns
20 ns
20 ns
Figure 10. Maximum Negative
Overshoot Waveform
V_CC
+2.0 V
V_CC
+0.5 V
2.0 V
20 ns
20 ns
20 ns
Figure 11. Maximum Positive
Overshoot Waveform
OPERATING RANGES
Industrial (I) Devices
Ambient Temperature (T_A) . . . . . . . . . . . . . . –40°C to +85°C
Supply Voltages
V_CC (regulated voltage range) . . . . . . . . . . . . . . . . 3.0–3.6 V
V_CC (full voltage range) . . . . . . . . . . . . . . . . . . . . . 2.7–3.6 V
V_IO (Note 2) . . . . . . . . . . . . . . . . . . . . . . 1.65–3.6 V (Note 3)
Notes:
1. Operating ranges define those limits between which the
functionality of the device is guaranteed.
2. See “Ordering Information” on page 10 for valid V_CC/V_IO
range combinations. The I/Os will not operate at 3V when
V_IO = 1.8V.
3. 100R parts have a V_IO range from 2.7–3.6 V.
44
Am29LV128MH/L
25270C7 January 31, 2007