AMMCL00XA Datasheet, PDF (1/36 Pages) Advanced Micro Devices – 2 or 4 Megabyte 3.0 Volt-only Flash Miniature Card

PRELIMINARY
AmMCL00XA
2 or 4 Megabyte 3.0 Volt-only Flash Miniature Card
DISTINCTIVE CHARACTERISTICS
s 2 or 4 Mbytes of addressable Flash memory
s 2.7 V to 3.6 V, single power supply operation
— Write and read voltage: 3.0 V –10/+20%
— No additional supply current required for V_PP
s Fast access time
— 150 ns maximum access time
s CMOS low power consumption
— Typical active read current:
35 mA (word mode)
— Typical active erase/write current:
40 mA (word mode)
— Typical standby current:
10 µA (4 Mbyte); 5 µA (2 Mbyte)
s High write endurance
— Guaranteed minimum 100,000 write/erase
cycles per card
— More than 1,000,000 cycles per card typical
s Uniform sector architecture
— 64K byte individually useable sectors
— Erase Suspend/Resume increases system level
performance
— BUSY# and RESET# signals
s Zero data retention power
— No power required to retain data
s Available in industrial temperature grade
(–40°C to +85°C)
s Miniature Card standard form factor
— True interchangeability
— 60-pad elastomeric connector
— Supports multiple technologies
— Sonic welded stainless steel case
— PCMCIA Type II adapter available
— Selectable byte- or word-wide configuration
— Small Form Factor (38 mm x 33 mm x 3.5 mm)
s 60 connection bus
— 16-bit data bus
— 25-bit address bus
— Easy system integration
— Low cost implementation
— Low cost cards
s Consumer-friendly mechanicals
— User can easily insert and remove card, upgrade
memory, and add applications
s Voltage level keying
— Does not allow a 3 V card to plug into a 5 V
system and vice versa
— Single power supply design
— System does not need a separate program
voltage supply; only one is necessary to read
and write
GENERAL DESCRIPTION
The Miniature Card is an expansion card that pro-
vides a low cost, low power, high-performance, small
form factor solution for data and file storage to the
portable, handheld market, which includes audio,
digital film, wireless, and PDA (Portable Digital
Assistant) applications.
Miniature cards can be easily “snapped” into the back
of an electronic system and can be readily removed
and replaced by end users. AMD’s 3 V Flash Miniature
Cards are manufactured using AMD’s industry leading
3.0 volt-only, single-power-supply Am29LV081 Flash
Memory device, ensuring high reliability and excellent
performance. The Miniature Card is less than 30% of
the size of a PCMCIA memory card. Applications
include digital voice recorders, pocket PCs and intelli-
gent organizers, smart cellular telephones, voice and
data messaging pagers, digital still cameras and por-
table instrumentation equipment.
The Miniature Card specification will be defined by
PCMCIA as of October 1997. The participating associ-
ation members include major Flash memory vendors
and leading consumer electronics OEMs. The goal of
the Miniature Card specification is to promote an open,
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication# 21138 Rev: E Amendment/0
Issue Date: September 1997