EY1603 Datasheet, PDF (3/10 Pages) Altera Corporation – 40V, Low Quiescent Current, 150mA Linear Regulator

Page 3
Absolute Maximum Ratings
VIN Pin to GND Voltage. . . . . . . . . . . . . . . GND - 0.3V to +45V
VOUT Pin to GND Voltage. . . . . . . . . . . . . . .GND - 0.3V to 16V
VFB Pin to GND Voltage. . . . . . . . . . . . . . . . . .GND - 0.3V to 3V
EN Pin to GND Voltage. . . . . . . . . . . . . . . . . GND - 0.3V to VIN
Output Short-circuit Duration . . . . . . . . . . . . . . . . . . . Indefinite
ESD Rating
Human Body Model (Tested per JESD22-A114E) . . . . . . 5kV
Machine Model (Tested per JESD-A115-A) . . . . . . . . . . 200V
Charge Device Model (Tested per JESD22-C101C) . . . 2.2kV
Latch Up (Tested per JESD78B; Class II, Level A). . . . . 100mA
Thermal Information
Thermal Resistance (Typical)
_JA (°C/W) _JC (°C/W)
14 Ld HTSSOP Package (Notes 3, 4) 37
5
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . .-65°C to +175°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .—
Recommended Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . -40°C to +125°C
VIN pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . .+6V to +40V
VOUT pin to GND Voltage . . . . . . . . . . . . . . . . . . +2.5V to +12V
EN pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . 0V to +40V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
3. _JA is measured with the component mounted on a high effective thermal conductivity test board in free air.
4. For _JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Recommended Operating Conditions, unless otherwise noted. V_IN = 14V, I_OUT = 1mA, C_IN = 0.1µF, C_OUT = 10µF,
T_A = T_J = -40°C to +125°C, unless otherwise noted. Typical specifications are at T_A = +25°C. Boldface limits apply over the operating temperature
range, -40°C to +125°C.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 7) TYP (Note 7) UNIT
Input Voltage Range
Guaranteed Output
Current
V_IN
I_OUT
V_IN = V_OUT + VDO
6
40
V
150
mA
VFB Reference Voltage
Line Regulation
Load Regulation
Dropout Voltage
(Note 5)
Shutdown Current
Quiescent Current
Power Supply Rejection
Ratio
V_OUT
V_OUT/V_IN
V_OUT/I_OUT
V_DO
I_SHDN
IQ
PSRR
EN = High, V_IN = 14V, I_OUT = 0.1mA to 150mA
3V  V_IN  40V, I_OUT = 1mA
V_IN = V_OUT +V_DO, I_OUT = 100µA to 150mA
I_OUT = 1mA, V_OUT = 3.3V
I_OUT = 150mA, V_OUT = 3.3V
I_OUT = 1mA, V_OUT = 5V
I_OUT = 150mA, V_OUT = 5V
EN = LOW
EN = HIGH, I_OUT = 0mA
EN = HIGH, I_OUT = 1mA
EN = HIGH, I_OUT = 10mA
EN = HIGH, I_OUT = 150mA
f = 100Hz; V_{IN_RIPPLE} = 500mV_P-P; Load = 150mA
1.211 1.223 1.235 V
0.04 0.15 %
0.3 0.6 %
7
33 mV
380 525 mV
7
33 mV
295 460 mV
2
3.64 µA
18
24
µA
22
42
µA
34
60
µA
90 125 µA
66
dB
EN FUNCTION
EN Threshold Voltage
EN Pin Current
EN to Regulation Time
(Note 6)
V_{EN_H}
V_{EN_L}
I_EN
t_EN
V_OUT = Off to On
V_OUT = On to Off
V_OUT = 0V
1.485 V
0.975
V
0.026
µA
1.65 1.93 ms
February 2014 Altera Corporation
09619
EY1603 40V, Low Quiescent Current, 150mA Linear Regulator
March 14, 2014
Rev A