EPM7032LC44-7 Datasheet, PDF (2/66 Pages) Altera Corporation – Programmable Logic Device Family

MAX 7000 Programmable Logic Device Family Data Sheet
Table 2. MAX 7000S Device Features
Feature
Usable gates
Macrocells
Logic array
blocks
Maximum
user I/O pins
t_PD (ns)
t_SU (ns)
t_FSU (ns)
t_CO1 (ns)
f_CNT (MHz)
EPM7032S
600
32
2
36
5
2.9
2.5
3.2
175.4
EPM7064S
1,250
64
4
68
5
2.9
2.5
3.2
175.4
EPM7128S
2,500
128
8
100
6
3.4
2.5
4
147.1
EPM7160S
3,200
160
10
104
6
3.4
2.5
3.9
149.3
EPM7192S
3,750
192
12
124
7.5
4.1
3
4.7
125.0
EPM7256S
5,000
256
16
164
7.5
3.9
3
4.7
128.2
...and More
Features
■ Open-drain output option in MAX 7000S devices
■ Programmable macrocell flipflops with individual clear, preset,
clock, and clock enable controls
■ Programmable power-saving mode for a reduction of over 50% in
each macrocell
■ Configurable expander product-term distribution, allowing up to
32 product terms per macrocell
■ 44 to 208 pins available in plastic J-lead chip carrier (PLCC), ceramic
pin-grid array (PGA), plastic quad flat pack (PQFP), power quad flat
pack (RQFP), and 1.0-mm thin quad flat pack (TQFP) packages
■ Programmable security bit for protection of proprietary designs
■ 3.3-V or 5.0-V operation
– MultiVolt^TM I/O interface operation, allowing devices to
interface with 3.3-V or 5.0-V devices (MultiVolt I/O operation is
not available in 44-pin packages)
– Pin compatible with low-voltage MAX 7000A and MAX 7000B
devices
■ Enhanced features available in MAX 7000E and MAX 7000S devices
– Six pin- or logic-driven output enable signals
– Two global clock signals with optional inversion
– Enhanced interconnect resources for improved routability
– Fast input setup times provided by a dedicated path from I/O
pin to macrocell registers
– Programmable output slew-rate control
■ Software design support and automatic place-and-route provided by
Altera’s development system for Windows-based PCs and Sun
SPARCstation, and HP 9000 Series 700/800 workstations
2
Altera Corporation