802T-ATPD Datasheet, PDF (4/4 Pages) Allen-Bradley – Safety Limit Switches

Modifications
Metric Conduit Entry
To order a limit switch with a 20mm conduit entry, add the suffix
“S6” to the catalogue number. Example: 802T-APDS6
Pre-wired Cable
To order factory installed pre-wired type STOOW-A cable (5
conductor), add the suffix “Y” plus the number of feet required.
The standard cable length is 1.52m (5ft). Extended cable lengths are
available in multiples of 1.22m (4ft) only.
Example: To order a limit switch with a factory installed 1.52m (5ft)
cable, the catalogue number would become 802T-APDY5. To order
a limit switch with a factory installed 2.44m (8ft) cable, the catalogue
number would become 802T-APDY8.
Mini Style Quick-Disconnect
To order a Bulletin 802T pre-wired limit switch with a 5-pin (2
circuit) or 9-pin (4 circuit) mini connector, add the suffix “J1” or
“J9” depending on desired wiring (“J9” wiring not available for 4
circuit models) to the catalogue number. Example: 802T-APDJ1
5-Pin Mini-Type Receptacle (2 circuit)
“J1” Wiring
2
4
“J9” Wiring
5
1
Same
Polarity
Same
Polarity
Position Interlock Switches
Safety Limit Switches
802T Direct Opening Action NEMA-Style Switches
Micro Style Quick-Disconnect
Micro quick-disconnects are available with a 5 pin 2 keyway AC or 5
pin single keyway DC. To order a limit switch with a AC micro
quick-disconnect, add the suffix “R5” to the catalogue number. To
order a limit switch with a DC micro quick-disconnect, add the
suffix “D5” to the catalogue number. Example: 802T-APDR5 and
802T-APDD5.
AC Micro QD
1
2
Same
Polarity
3
4
12
3
4
5
DC Micro QD
2
4
Same
Polarity
3
1
21
5
34
Levers
Type
Roller
Material Dia. Width
Nylon
0.75in 0.28in
Nylon
0.75in 1in
Steel
0.75in 0.25in
Catalog
Number
802T-W1
802T-W1H
802T-W1A
5
1
2
4
Ball Bearing 0.75in 0.23in 802T-W1B
Non-Adj. Cast Lever
1.5in Radius
Roller on Front
9-Pin Mini-Type Receptacle (4 circuit)
“J1” Wiring (“J9” wiring not available for 4 circuit)
3
4
Same
Polarity
1
2
8
6
9
5
Same
Polarity
17
28 6
9 10
3
5
4
7-17