700-SK Datasheet, PDF (4/5 Pages) Allen-Bradley – Solid-State Relays

Output Module, Continued
Bulletin 700-SK
Solid-State Relays
Specifications, Continued
Cat. No.
Load Switching Method/Device
Pick-up time
Drop-out time
Response frequency
Output ON voltage drop
Leakage current
VDRM VCEO (V)
Output di/dt (A/uS)
Output dv/dt (V/uS)
Output I²t (A²S)
Output Tj (°C) Max.
Insulation resistance
Dielectric strength
Vibration resistance (max.)
Shock resistance (max.)
Ambient temperature
Operating
Storage
Standards
Ambient humidity
Weight
Operating
Characteristics
700-SKOZ2Z25
700-SKON2Z25
700-SKOC2Z25
700-SKOC1Z25
Triac
Transistor
1/2 of load power source cycle + 1 ms max.
1 ms max.
1/2 of load power source cycle + 1 ms max.
2 ms max.
20 Hz
100 kHz
1.6 V max.
2.5V max.
1.5 mA max.
1 mA max.
600 (ref.value)
600 (ref.value)
80 (ref.value)
400 (ref.value)
30
30
—
—
300
300
—
—
10.4
10.4
—
—
125
125
150
150
100 MΩ min. between input and output
4,000V AC, 50/60 Hz for 1 min. between input and output
10…55 Hz, 1.5 mm double amplitude (10 G)
1,000 m/s² (100 G)
–30…80°C (–22…176°F) with no icing or condensation
–30…100°C (–22…212°F) with no icing or condensation
UL 508
CSA C22.2, CE
TÜV
45…85% (no condensation)
Approx. 18 g
Load Current vs. Ambient Temperature Characteristics
For 2 A Versions
2
1.5
1
0.5
˚c
Inrush Current
Resistivity➊
70₇0₀-S₀K_-SO_EZ₀/₅ SKON
2
1.5
1
0.5
700-SKOC2
˚c
700-SKOZ /SKOC1
2000
➊ Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability
once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR.
61