English
Language : 

5812-F Datasheet, PDF (3/8 Pages) Allegro MicroSystems – BiMOS II 20-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS
◁
5812-F
20-BIT SERIAL-INPUT,
LATCHED SOURCE DRIVERS
WITH ACTIVE-DMOS PULL-DOWNS
ELECTRICAL CHARACTERISTICS at TA = +25°C, VBB = 60 V (unless otherwise noted).
Characteristic
Output Leakage Current
Output Voltage
Output Pull-Down Current
Input Voltage
Input Current
Serial Data
Maximum Clock Frequency
Supply Current
Blanking to Output Delay
Output Fall Time
Output Rise Time
Symbol
ICEX
VOUT(1)
VOUT(0)
IOUT(0)
VIN(1)
VIN(0)
IIN(1)
IIN(0)
VOUT(1)
VOUT(0)
fclk
IDD(1)
IDD(0)
IBB(1)
IBB(0)
tPHL
tPLH
tf
tr
Test Conditions
VOUT = 0 V, TA = +70°C
IOUT = -25 mA, VBB = 60 V
IOUT = 1 mA
IOUT = 2 mA
VOUT = 5 V to VBB
VOUT = 20 V to VBB
VIN = VDD
VIN = 0.8 V
IOUT = -200 µA
IOUT = 200 µA
All Outputs High
All Outputs Low
Outputs High, No Load
Outputs Low
CL = 30 pF, 50% to 50%
CL = 30 pF, 50% to 50%
CL = 30 pF, 90% to 10%
CL = 30 pF, 10% to 90%
Limits @ VDD = 5 V
Mln. Typ. Max.
— -5.0 -15
58 58.5 —
— 2.0 3.0
———
2.0 3.5 —
———
3.5 — 5.3
-0.3 — +0.8
— 0.05 0.5
— -0.05 -0.5
4.5 4.7 —
— 200 250
3.3* — —
— 100 300
— 100 300
— 1.5 4.0
— 10 100
— 2000 —
— 1000 —
— 1450 —
— 650 —
Limits @ VDD = 12 V
Min. Typ. Max. Units
— -5.0 -15
µA
58 58.5 —
V
———
V
— 2.0 3.5
V
———
mA
8.0 13 —
mA
10.5 — 12.3
V
-0.3 — +0.8
V
— 0.1 1.0
µA
— -0.1 -1.0 µA
11.7 11.8 —
V
— 100 200 mV
— — — MHz
— 200 500 µA
— 200 500 µA
— 1.5 4.0 mA
— 10 100 µA
— 1000 —
ns
— 850 —
ns
— 650 —
ns
— 700 —
ns
Negative current is defined as coming out of (sourcing) the specified device pin.
* Operation at a clock frequency greater than the specified minimum value is possible but not warranteed.
www.allegromicro.com
 ▷