A4490 Datasheet, PDF (1/16 Pages) Allegro MicroSystems – Triple Output Step-Down Switching Regulator

A4490
Triple Output Step-Down Switching Regulator
Features and Benefits
▪ Three buck converters
▪ 4.5 to 34 V input voltage range
▪ 550 kHz fixed frequency
▪ Multiphase switching
▪ Independent control of each converter
▪ Power-on-reset flag
▪ Internal compensation
▪ 4 × 4 mm QFN Package, small PCB footprint
Package: 20-contact QFN (suffix ES)
Approximate size
Description
Designed to provide the power supply requirements of printers,
office automation, industrial, and portable equipment, the
A4490 provides three high current, high performance, switching
regulator outputs with independent soft start.
High frequency switching allows selection of inexpensive
inductors and small ceramic output capacitors. The turn-on
cycles of the regulators are interleaved to minimize stresses on
the input capacitors and to reduce EMI. A charge pump is used
to provide the supply for driving the power switches, ensuring
operation at very wide operating duty cycles and avoiding the
need for power-draining clamp circuits.
Apower-on-reset circuit with user configurable delay indicates
when enabled regulators are in specification. The power-on-
reset flag also indicates when the input voltage drops below
specification, giving the system controller advance warning
while the switchers continue to operate down to the shutdown
level.
Internal diagnostics provide comprehensive protection against
overloads, input undervoltages, and overtemperatures.
Continued on the next page…
V_BB
Microcontroller or
Controller Logic
4490-DS, Rev. 9
Typical Application
VDD CP1 CP2
PORZ
CPOR
VCP _VBB1
LX1
ENB1
ENB2
ENB3
A4490
FB1
VBB2
LX2
PGND
FB2
VBB3
LX3
GND
FB3
V_REG1
V_REG2
V_REG3