|
AKD4537 Datasheet, PDF (9/32 Pages) Asahi Kasei Microsystems – Evaluation board Rev.B for AK4537 | |||
|
◁ |
ASAHI KASEI
[AKD4537]
2. Control Software Manual
n Set-up of evaluation board and control software
This evaluation board does not correspond to I2C control.
1. Set up the AKD4537 according to previous term.
2. Connect IBM-AT compatible PC with AKD4537 by 10-line type flat cable (packed with AKD4537). Take care of
the direction of 10pin header. (Please install the driver in the CD-ROM when this control software is used on
Windows 2000/XP. Please refer âInstallation Manual of Control Software Driver by AKM device control softwareâ.
In case of Windows95/98/ME, this installation is not needed. This control software does not operate on Windows
NT.)
3. Insert the CD-ROM labeled âAK4537 Evaluation Kitâ into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon of âakd4537.exeâ to set up the control program.
5. Then please evaluate according to the follows.
n Operation flow
Keep the following flow.
1. Set up the control program according to explanation above.
2. Click âPort Setupâ button.
3. Click âWrite defaultâ button.
4. Then set up the dialog and input data.
n Explanation of each buttons
1. [Port Setup] :
2. [Write default] :
3. [All Read] :
4. [Function1] :
5. [Function2] :
6. [Write] :
7. [Read] :
Set up the printer port.
Initialize the register of AK4537.
Read all registers of AK4537.
Dialog to write data by keyboard operation.
Dialog to evaluate IPGA and ATTL/ATTR.
Dialog to write data by mouse operation.
Read data by mouse operation.
<KM069501>
-9-
2002/11
|
▷ |