AKD4186-A Datasheet, PDF (9/19 Pages) Asahi Kasei Microsystems – Evaluation board Rev.1 for AK4186

[AKD4186-A]
CONTROL SOFTWARE MANUAL
■ Set-up of evaluation board and control software
1. Set up the AKD4186 board.
2. Connect IBM-AT compatible PC with AKD4186 by 10-line type flat cable (packed with AKD4186). Take care of
the direction of 10pin header. (Please install the driver in the CD-ROM when this control software is used on
Windows 2000/XP/Vista. Please refer “Installation Manual of Control Software Driver by AKM device control
software”. In case of Windows95/98/ME, this installation is not needed. In case of Windows Vista, please open
the property of the control soft, and set the compatibility to “Windows XP”. This control software does not
operate on Windows NT.)
3. Turn on power supply for the AKD4186 board.
4. Insert the CD-ROM labeled “AK4186 Evaluation Kit” into the CD-ROM drive.
5. Access the CD-ROM drive and double-click the icon of “akd4186.exe” to set up the control program.
6. Click the “RESET” on the top-left of the control soft window to reset the AK4186.
7. Then evaluate according to the follows.
<KM095901>
-9-
2009/2