AK9710 Datasheet, PDF (9/10 Pages) Asahi Kasei Microsystems – High Speed Response (~100kHz)

[AK9710AEF01]
13. Precautions
<Electrostatic Discharge (ESD)>
This product is sensitive to Electrostatic Discharge (ESD). When handling the product, please be careful
about the following matters.
When you handle the product, please work in the environment to protect against static electricity
(ex. more than 40%RH).
Always use an ESD wrist strap and wear antistatic clothes.
Please take electrostatic measures of the container etc. where the product touches directly.
<Storage Environment>
Please avoid exposed to direct sunlight. Please keep it as much as possible at room temperature and
normal humidity. The desirable condition is 5-35 C and 40 - 85%RH. In addition, please keep the
product away from the chlorine gas and the causticity gas. When this product is kept in inappropriate
environment, it may influence product properties.
<Other Precautions>
As Gallium Arsenide (GaAs) and Indium Antimonide (InSb) are used for this product, please be careful
about the following matters.
1) Please do not take this product to burning and melting and destroys, chemical processing etc..
2) When you discard this product, please handle it according to related laws and your regulations on
waste disposal.
Please be careful not to damage and pollute the sensor surface because the sensor properties may
change.
14. Ordering Guide
AK9710AEF01
-40 ~ 85ºC
10-pin SON
Consumer Grade
AKD9710
Evaluation Board
15. Revision History
Date (Y/M/D)
16/10/24
16/12/20
Revision
00
01
Reason
First Edition
Correction
Page
4
Contents
Corrected Final Test Condition of Electrical
Characteristics
016013404-E-01
-9-
2016/12