AK9710 Datasheet, PDF (4/10 Pages) Asahi Kasei Microsystems – High Speed Response (~100kHz)

[AK9710AEF01]
5.2. Functions
Table 5.1 Pin Functions
Pin No. Name I/O
Functions
1, 2, 3, 4, 10 Dp － p-type output pin
5, 6, 7, 8, 9 Dn － n-type output pin
6. Absolute Maximum Ratings
Table 6.1 Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Unit
Operating Temperature
Ta
-40
85
°C
Storage Temperature
Tstg
-40
85
°C
Notes
Operation exceeding these ratings may cause permanent damage to device.
Do not apply a bias voltage.
7. Recommended Operating Conditions
Table 7.1 Recommended Operating Conditions
Parameter
Symbol Min. Typ. Max.
Unit
Input Voltage (*1)
Vin
-10
0
10
μV
Operating Temperature
Ta
-40
85
°C
Note
*1: Do not apply a bias voltage between Dp and Dn.
Refer to the recommended external circuits.
8. Electrical Characteristics
Table 8.1 Electrical Characteristics
Unless otherwise specified, Ta = 25°C
Parameter
Symbol
Min.
Typ.
Max.
Unit
Output Current (*2)
Ip
1.04
2.97
4.90
nA
Internal Resistance (*3)
Ro
75
188
kΩ
Notes:
*2: Measurement conditions:
The final test is done by the equivalent light source as below.
- Light source
Blackbody furnace with diameter = 22.2mm
Surface temperature = 500C
- Distance
AK9710AEF01 to blackbody = 10cm.
- The soda glass is placed between the sensor and the blackbody furnace.
- Measured by a 10Hz lock-in amplifier.
*3: Measurement conditions:
- Average value at ±500nA output.
016013404-E-01
-4-
2016/12